purple98haz28

iTrader: (5)

Just as the title states... I am no guru as far as wheel fitment goes. I am looking for a drag wheel setup front and rear that will fit my stock width s60. Im wanting wheels to be flush with fenders and dont mind grinding on calipers if need be. What doe my offset and backspacing need to be? Thanks.

Camaro396

iTrader: (14)

Many threads on this...do a search. Stock width size is 15x10 with 7.5 backspace. Weld RTS wheels and Billet Specialties F body specific wheels are a popular choice for OEM LS1 brakes.

purple98haz28

iTrader: (5)

I have searched just got confused. I have been a member here for 10 or more years..... I just thought ther were more options of 15x8 I was wanting to stay with a 26 in tire as that is what I plugged into calculator to pick my 4:10 gears. Or are there some options for 26 in tires on that fit 10 in rims that I have not found.

Rise of the Phoenix

iTrader: (27)

Pretty much any drag wheel you can think of is made with the correct backspacing to fit.

imma_stocker

iTrader: (19)

Weld RTS were designed so you can run a 15" rim without grinding calipers.

Rise of the Phoenix

iTrader: (27)

Same with the Race Star wheels. You need to checkout the drag setup thread on here. Tons of different setups with backspacing and offset included.