How is clearance on lowered 02 trans am drag radials
08-02-2004, 02:43 PM
#1
Teching In
Thread Starter
Join Date: Aug 2004
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
How is clearance on lowered 02 trans am drag radials I like the HRE 847R and the HRE 547 in 18 inches. I'm thinking 18x9 in front and 18x10.5 in rear. My 02' trans am is lowered with eibach prokit 1.5 inches. I want to run a drag radial in the rear and I was wondering if the nitto drag radials 295 35 18 wold fit ok? If not does anyone make a 30 series drag radial?
08-03-2004, 11:09 AM
#2
They're probably going to rub, so all you need to do is bang in anywhere that it rubs on the inside fender with a nice hammer ,and roll your fender lips. The fender lip idea is a little more complicated and you might need a professional on that one.
