Stone0fFire

i am running 295/50/15
using spacers and no trimming anything
(but it does scrape with fat ppl in the rear)

what mod(s) will i have to do to run=

275/60/15
315/60/15
295/65/15

i think i saw this in a sticky but i could not find it.

SSilverSSurfer

iTrader: (8)

put some 325/50/15's and prepare to work your *** off to get them to fit...but they will go on after some work

Stone0fFire

i know you guys know..

HELP

i think im going to order 275/60/15
do whatever i have to do
and then see if i decide to 315 later..

Christian8A

iTrader: (14)

28"x10.5 will require maybe 10 mins of BFH is not bad really, I have 28"x11.50 and It took just a little but maybe 10.5 not at all
here is a video of how we did it, hope it helps
Of course that was only to fit them, later im going to actually cut there and put a new piece so is clean, cuz Im planning on running 30"x10.5 slicks soon

SgtB

iTrader: (3)

I have 275/60/15 on mine. no mods othr than your normal caliper grinding

Stone0fFire

excellent.

this is what i wanted to hear.

Christian8A= i dont understand what youre saying.. are you talking in inches?
i think i will have to learn this measurement
i see this is how slicks are ordered

and thanks for the vid
i think seeing what i have to do,
i may just go straight to the 315/60/15


copy paste

Christian8A

iTrader: (14)

Yea 28inches by 11.50 but I should have get the 28inches by 10.5 I only wanted tall tires helping it to pull the front tires a little bit more
so Im going now to run 30inches by 10.5 so I hope they fit after making room for the 28's but if not I will have to cut there and rebuild it
will be a nice weekend job

roosteracer

iTrader: (1)

if i run 325/50/15 will i have to roll the fender lip?

Stone0fFire

ttt

i know you guys have done this before!

wheres the sticky on this?