ls1transam346

iTrader: (1)

i just ordered the 17x9.5 and 18x10.5 combo and plan on running like a 285 or 295 or even maybe 315tire in the rear. i heard that i would have to do the bfh mod or a small spacer. what size spacer should i get? also what exactly does bfh stand for i have an idea but tell me anyway.

H82GOSLW

iTrader: (2)

BFH = Big f%cking hammer

Have fun doing that mod...I put C5 coupe wheels on my Z and the wheel wells needed to be "coaxed" into allowing those wheels to reside comfortably without rubbing during aggressive driving.

bene

iTrader: (16)

If you ordered them from LMP store, they sell Z06 wheels w/ 53 mm offset. With that offset you don't need BFH mod. I have these on my Z28.

ls1transam346

iTrader: (1)

thats what i thought bfh was. i ordered my rims from tomz. so it has a 58mm offset. so any ideas on a spacer?

69TA

iTrader: (263)

1/4" and you should be fine. But you will need better studs go with the ARP ones

Xx01CamaroZ28xX

iTrader: (1)

^^^1/4" will do the trick for sure.....

beautie

iTrader: (1)

i just ordered the same setup and i went with the 285-35. this is what he recommended to me. he said they would be tight but they would fit.

l337_haxs

iTrader: (1)

I have black z06 motorsports 18x10.5 rear and 18x9.5 front, I run a 295 35 18 in the rear and a 275 35 18 in the front. I had to do the BFH mod to the rear's. Other than that I can take sharp turns and no rub

408Maro

iTrader: (14)

i have the same 17-18 combo from toms and only had enough to get 275/40 for the rear and im using a 5/16 spacer right now i also need to do the bfh mod or get longer studs or even both not sure yet what to do