Ricks99ls1

iTrader: (9)

I have a 99 firebird, bumpstops removed, i am getting my torue thrust 2's soon and i have the 315 in the rear, i was looking to do the heater hose mod, where the hose gets wrapped over the top coil on the spring, am i going to have any problems running that large of a tire? Will i need a panhard bar? any help would be appreciaed, i didnt purchase these yet and would like to know your guy advise before i do. Thank You Ricky

Raise

iTrader: (31)

no problem at all because of the offset of the wheel. when u get into the 50+ offset in the rear, thats when u start rubbing

Ricks99ls1

iTrader: (9)

excellent, so the torque thrust offset doesnt come in the 50+ offset? I appreciate the help Raise!

Raise

iTrader: (31)

46mm i believe. i think the 50mm is strictly the zr1 wheels. i had the tt2s with 315s and didnt need spacers or have to bang in the inner wheel well. u will be fine. the lower the offset, the more the wheel will stick out, and the tt2 sticks out a lil further than the zr1s so it sits perfectly flush with the fenders. its a great look from the rear

neeshSS

i would still suggest an adj. panhard bar..

DopdBrd

iTrader: (25)

Had 315/35ZR17 BFG KD's on the rear of mine with TTII's and Eibach Sportlines and they didn't hit at all!

TomZwheels

iTrader: (45)

You should not have any problems at all with either the TT2's or the TTM's.

Ricks99ls1

iTrader: (9)

excellent fellas, appreciate the help

Raise

iTrader: (31)

u got it man

Clayman

I had a little bit of rubbing on mine, but it was really only enough to polish up the metal a bit, and it didnt damage the rim or tire at all.