Kamauxx

iTrader: (1)

I bought a set of Ruff Racing 278s. The rears are 19x9.5 w/48mm offset. Tires for rear are 255/35/19 GSD3.

Will these bolt on and ride with no modification to the fender?

Car is a GTO.

Xsta Z 28

iTrader: (2)

Should fit fine. No mods. The only issue I can think of you might want to look into hub centric rings. I believe that the center hole of the wheel is bigger that the F-Car hub button.

Kamauxx

iTrader: (1)

Yea, it's being shipped with rings. I'm going to put the wheels on w/o them first and if there's no problems I won't add them.

Breathtaker

iTrader: (31)

Why didn't you ask if they'll fit before buying'em?

Kamauxx

iTrader: (1)

Because I was going to get them anyway. Just want to know if they'll bolt on problem free or if I should be calling shops about fender rolling.

musclehead

iTrader: (2)

With a 48mm offset you'll be fine.

TheSilverOne

iTrader: (22)

get a wider tire

Kamauxx

iTrader: (1)

You obviously know nothing about GTOs.

DaGeneral

iTrader: (3)

You never said what car they were for.

Kamauxx

iTrader: (1)

Holy ****! As I was.

It's an 06 GOAT. Damn, I know that wheel/tire combo would be undersized for a fbody, lmao.

And here I was getting my hopes up. So, GTO owners, think this combo will fit the rear w/o rolling the fenders?

ericn99

those are the exact size I bought bolted right up but I got 275's on those wheels
[IMG][/IMG]

Kamauxx

iTrader: (1)

You have a bigger wheel well than me. I forgot to add in the first post that the wheels are going on a GTO.

jimmyducati

iTrader: (3)

i wouldnt reccomend putting them on without the rings! i made that mistake with my old thunderbird and one of my brand new 10th anniversary cobra wheels ended up beating me to a redlight!! its the hubs that actually carry the cars weight, not the lugs (they are designed to hold the wheel against the hub, but not support the weight of the car). sure the lugs can do it, and may never fail, but why take the chance!!