phantomLT1

iTrader: (2)

The reason I am asking for your opinion is because my rear is Narrowed 3' on each side so the rears are going to have that deep dish look, so maybe you have seen what each of these rims look like with small anount of backspacing.Rims will be 18x9.5 upfront and 18x11 in rear. I like the following and this is for the CAR IN SIGTHANKS....
iforged aeros
http://iforged.com/us/images/wheels/zoom/Aero.jpg

[
http://www.ccwheel.com/files/wheelpr...y.php?id=SP550
CCW sp505a
[url]http://whttp://www.ccwheel.com/files/wheelpr...ay.php?id=505a

StealthFormula

iTrader: (35)

My vote was for the Aero's. A very very close second I would choose the CCW SP550's. Not a fan of anything other than 5 spoke personally. I guess your not a fan but I would probaly get the Fiske FM5's over them all if it were me.

98TA86

iTrader: (1)

can't go wrong with any of those choices in my opinion but never seen sp20a's or senekas on a trans am before would be cool to do something original

phantomLT1

iTrader: (2)

Thats kinda what I was thinkin about being original but would they look good with a deep dish look on the rear is what I am concerned about

blownws6_nc

iTrader: (10)

Im like these http://iforged.com/us/images/wheels/zoom/Seneka.jpg

Iron Head

iTrader: (11)

I voted for the first ones. That is my unbiased opinion.

SSNISTR

iTrader: (10)

The 550's or the 505's.

Not really a fan of IForged, to "blingy" and only certain wheels can pull of rivets. IMO, those can't.

If it was me, 550's.

Iron Head

iTrader: (11)

Oh, You must be talking about the twelve point bolts.

Kev98Ta

iTrader: (4)

Voted Aero's!

LS199CAMAROZ28

iTrader: (32)

20A or 550

Black_Z28

iTrader: (1)

I completely agree. I'm not a fan of bolts on any wheel, even if they are needed because they're 3 piece. I also, would choose a different finish. I'm not a fan of chrome.

Redlinez

iTrader: (5)

IMHO, the SP550's are the cleanest unclutterred wheels there, and ones I haven't seen on a car yet. Are you selling your wheels?

phantomLT1

iTrader: (2)

Already sold them a while back I agree with your statement about the SP550's. I just dont know if they would look good on my car because my rear is narrowed 3' on each side.

BBLS1

iTrader: (4)

I think the senekas or sp20a

MYSTIC-1SC

iTrader: (14)

sp20a wheels for sure.

nifty97z

iTrader: (47)

I vote the Senekas; then the sp20s. With the T/As, they can pull off a full wheel VERY well and look b/a!! Do not settle for the 5 spoke with yours

unknown pontiac

if you want to bling then either one of the Iforged, if not get the 505s. The 505s look best to me.

SS1875

iTrader: (34)

I vote these.

http://www.ccwheel.com/files/wheelpr...y.php?id=SP20a

raptorws6

iTrader: (1)

CCW sp550's, CCW sp505a, or CCWsp20a all will look good. The sp20a's would be different I would like to see how they look on a TA.

FlashLCD33

iTrader: (8)

I think 550s with a deep dish would look GREAT.

They are all winners.