94BlueZ28

iTrader: (34)

I'm getting 1.66 60ft's but I know I could do a little better. My whole rear is supported by BMR and it's all adjutable. I've found the sweet spot running 15 psi in my mickey thompson's. I'm wondering where I could adjust to get it to hook a little better. I'm set pretty much at stock settings with the panhard, control arms and -2 degree's on the Tq arm. I was wondering if I should adjust the torque arm but really dont know which way to go. Any advice on where i should set it. Thanks for the advice.

Mike Comp T/A #57

-2 is correct