LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   10 Second Club (https://ls1tech.com/forums/10-second-club-88/)
-   -   Finally in the 10s all motor 6 speed (https://ls1tech.com/forums/10-second-club/1914142-finally-10s-all-motor-6-speed.html)

Ls1_ben 01-27-2019 01:40 PM

Finally in the 10s all motor 6 speed
 

https://cimg3.ibsrv.net/gimg/ls1tech...538d18ce5.jpeg
After a 2 year journey with this car . Never would have guessed as I was doing the 243 heads and cam swap ,that this car would even come close to 10s all motor . But yesterday made a 3 hour drive to famoso race way in Bakersfield California and gotter done
ftp 98mm lid, fast 92/92 mani ,44lb injectors , 243 heads hand cleaned up and resurfaced. Head was never milled down . Comp cam 231/239 off the shelf cam . Texas speed 1 7/8 long tube headers . Tuned on E85.
quick performance Ford 9” stock length 4.11 gears (26” tire)

01CamaroSSTx 01-27-2019 02:20 PM

What RPM's are you launching at?

zboy2012 01-27-2019 02:46 PM

Seen your post on Facebook, looks good man. Hoping to reach that 10 second goal my self.

SoFla01SSLookinstok 01-27-2019 06:05 PM

Great job!

Ls1_ben 01-27-2019 11:28 PM


Originally Posted by 01CamaroSSTx (Post 20037802)
What RPM's are you launching at?

launching at 6300 rpms on the 2 step

HioSSilver 01-27-2019 11:43 PM

Nice job

Full-Force 01-28-2019 12:50 PM

What is your raceweight? I just took my car to the track yesterday and we ran about the same 1/8 time and mph. I have a heads, cam, intake setup as well. Actually we have a similar setup all around. 6 speed, 4.1x gears, etc.

I only launched mine at 5000. I need to get my 2 step on the car and launch it higher.

This pass was a 6.992 at 100.9mph with a 1.52 60'. I figured it up last night and it calculated out to a 10.89 so your time slip kinda confirms that. Our cars would be a hell of a race!


gesto 01-29-2019 12:48 PM

That's very impressive!

z28241 01-30-2019 07:04 PM

Well done! sounds pretty dialed in for those mods!

Ls1_ben 01-31-2019 11:52 AM


Originally Posted by Full-Force (Post 20038231)
What is your raceweight? I just took my car to the track yesterday and we ran about the same 1/8 time and mph. I have a heads, cam, intake setup as well. Actually we have a similar setup all around. 6 speed, 4.1x gears, etc.

I only launched mine at 5000. I need to get my 2 step on the car and launch it higher.

This pass was a 6.992 at 100.9mph with a 1.52 60'. I figured it up last night and it calculated out to a 10.89 so your time slip kinda confirms that. Our cars would be a hell of a race!

https://www.youtube.com/watch?v=y6tXVsKY1ro

race weight I’m not suenbut if I had to guess maybe 3300 with me in it 🤔

OneSlowV 01-31-2019 02:17 PM

Congratulations

ForceFedC5 01-31-2019 02:29 PM

Great runs! And driving back and forth to the track is an added bonus!

NAVYBLUE210 07-04-2019 03:07 PM

With SBE LS1?
VERY IMPRESSIVE!!

War Prayer 07-04-2019 08:55 PM

Wow, what's your suspension look like?

harveyd396 10-11-2019 08:16 PM

very nice, that's moving

Doug G 10-12-2019 06:55 PM

Welcome to the club :cheers:

80/TA/LT1 10-13-2019 12:08 AM

I'm interested in the suspension setup as well, care to share ? Hell of a run btw

Tuskyz28 10-13-2019 10:09 AM

Ben haven't been on board since February


All times are GMT -5. The time now is 03:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands