How can I run10's OK guys basically I want a street driven 10 sec car. I have everything in my sig, not instaled yet, plus about $6,000 more. I have stock pistons, crank, and connecting rods, and everything else internal other than the cam. What do i need to do. The only suspension mods I have would be the drag lauch springs and the BMR toquq arm. I amslo have a S3 ported throttle body. This is a chance to help a youg guy out. I really need help, thanks in advance. |
Depending on your raceweight you should be pretty close already, with a good tune of course. I would recommend at least some sfc's before you twist your car though. But anyway, slap a small shot of nitrous on there and be done with it! |
No NOS Really want to go N/A w/ maybe Forced Induction:) What suspenson parts do I need? Thanks for the replys. |
get a sts turbo kit with t70, fuelsystem, lca's and hal shocks up front and a set of lakewood shocks in the rear you will be way in to the 10's sts 4000 ish lca 125 shocks 550 ish racetronics fuel system 300 george |
my new setup OK, I know I will get 10's now. I just bought a Stage 2 CAS Twin Turbo setup, and I am getting a custom cam from Futral, and getting the race converter from Fuddle. I am als looking at selling whole engine and buying a forged shortblock. Anyways I should defintely be n the 10's now:) As far as suspension goes, I just got some SFC's and STB, and already got some BMR LCA's and Eiach Drag Launch kit. For a daily driver, what shocks do I need? I also bought a VFN 4' glass hod to save a little weight. I can't stop stop spending money on my car, someone HELP, I am only 19! |
Originally Posted by Auctane_71 I can't stop stop spending money on my car, someone HELP, I am only 19! i started out when i was 16 just wanting a nice street friendly 300hp 350cid in my irocz, well that turned into a 500hp 406 11 second street car. im 27 now and still throwing MOUNTAINS of money into my trans am. |
too late yeah, I just called LME and they are going to build me up a Forged Shortblock, plus I have to order a new fuel system, rear end, suspension parts, and I can't stop. |
now the money dumped in wont stop...lol, that tt setup should be bad, good luck with it |
Nice! Love to see pic's of the installed TT setup |
You must not be to bad off since your 19 and have a twin turbo car. Im 19 and I have a 17 second car. Must be nice to be rich. |
Man you dont have to be rich to have a fast car. you just have to know the right folks. and kiss their azz to get what you want for your car. |
At sea level, you need around 430-440 rwhp to run 10s in a 4th gen. You have many options, the cheapest of which would be put a NX 150 wet shot ($1000), headers ($400) and gears ($500) on it.
Originally Posted by Auctane_71 OK guys basically I want a street driven 10 sec car. I have everything in my sig, not instaled yet, plus about $6,000 more. I have stock pistons, crank, and connecting rods, and everything else internal other than the cam. What do i need to do. The only suspension mods I have would be the drag lauch springs and the BMR toquq arm. I amslo have a S3 ported throttle body. This is a chance to help a youg guy out. I really need help, thanks in advance. |
U ever heard of poor man's racing? Very possible to have a fast car. It's all about who you know. |
I used to have a 1988 toyota p/u that would kick the shit out of most anything on the street. I about $2000 in the whole truck. 400 SBC w/ a turbo 350 tranny. ran hot and cracked the block. oh well SH1T happens |
is this the same car that got beat by a bolt on TA that supposedly has a 6.0 in it? :whip: |
Originally Posted by Auctane_71 OK, I know I will get 10's now. I just bought a Stage 2 CAS Twin Turbo setup, and I am getting a custom cam from Futral, and getting the race converter from Fuddle. I am als looking at selling whole engine and buying a forged shortblock. Anyways I should defintely be n the 10's now:) As far as suspension goes, I just got some SFC's and STB, and already got some BMR LCA's and Eiach Drag Launch kit. For a daily driver, what shocks do I need? I also bought a VFN 4' glass hod to save a little weight. I can't stop stop spending money on my car, someone HELP, I am only 19! |
he supposedly has all this stuff sitting on his porch and it is all going to get done in a month(yeah right) hes also supposedly getting it done at Fastech, I'll be sure to ask sean if I go out there next weekend for the dyno day. |
| All times are GMT -5. The time now is 10:46 PM. |
© 2026 MH Sub I, LLC dba Internet Brands