Bandit28

iTrader: (28)

What does your 402 NA run in the 1/4 with stock suspension and BMR adj. TA, subframe connectors, lca and panhard bar.

ls1mongrel

iTrader: (32)

I seen a local guy run a 10.60 n/a, car was tuned for n2o, with 402, afr225s, fast 90/90.

JL ws-6

iTrader: (50)

Times in my sig along with weight, n/a 402, et240 heads, fast 90 setup. car still has some suspension work to do, and it's still running on a breakin tune as well.

I am expecting to best that time by at least a 1/4 second next year.

Black8Banger

iTrader: (9)

i ran 10.4 @ 130
3200lbrw, th400 3800 stall, 9" 4.11s, QA1 shocks, stock springs, spohn chassis mount torque arm, BMR drag bar

I know its not stock suspension but oh well
It was also N/A. It consistently runs 10.60s in average weather (60-80s)

JL ws-6

iTrader: (50)

Sounds like our car's running very good... I need to get my car to a 3200 race weight.. I think removing 380 lbs will probably do alot to get my car to where it should be. I need to work on that more

ls1408cp

iTrader: (37)

10.20s on the motor with a converter setup for a 300shot

Bandit28

iTrader: (28)

thanks for the info

cyclerage

iTrader: (59)

best were low 10.40 around 132
average are 10.50-.60 at 130

Bryan @ Speed Inc.

iTrader: (19)

car in sig ran 11.17 @120 1.51 60' with a baby cam (224/220 116)

leaving off idle, drag radials, and around a 3550lb raceweight.

slicks/T-brake may have gotten 10's, but for sure a cam that better suited the motor would have gotten there.

car on stock shocks/springs A-arms. chassis mount torque arm. non adjustable LCA's, boxed subframes, stock panhard bar, no sway bars.