Would This Setup Break 10's?
 

WS6 Current mods in sig

I'm wondering with these other mods can I break 10's.

Fast 90/90

Comp Cams LS1 3712R/3714R
intake .562 exhaust .566
lift 271 275

Port LS1 heads
(valve train undetermined)
**looking for ideas on valve sizes**

NX 150 wet kit

on MT ET Street Radial 275/40/17

Let me know what you 10 second guys think...and if you have any ideas...please let me know...I don't wanna go in the wrong direction here and end up being dissappointed....

With my old car, same setup minus the 90/90 on a 150 shot went 10.64@132.
Full weight, 9" rear with 3.89's, suspension.

I'm trying to figure out what valve I wanna go with...any input on sizes?

BUMP for opinions on my setup and ideas on valve sizes....

I did it with a basic LE1 heads and cam- thats ported stock heads and a cam
stock LS6 intake and ported TB with a 100 dry shot
no 90/90

you can do it, BUT
the question is can you get 1.5-1.6 60' with a stick and a 10 bolt¿

Very true....I don't think the 10 bolt can handle it...but I'm gunna try anyway...haha...but what size valves should I go with???

2.02" 1.56" I think thats it. That what I had.

alright...thanks alot...