Should I be close
Thread Starter
11 Second Club
iTrader: (29)
Joined: May 2006
Posts: 1,933
Likes: 1
From: The Bayou State
Should I be close Went to Pine Valley saturday to race and test out the car since the cam install. We were only allowed to run the 1/8th so anyone that is good at converting the times let me know about what I can expect in the 1/4. Gonna hit the 1/4 in a couple of weeks. Thanks. If these times will make the 11's in the 1/4 and a mod sees this, could I get a title change please or do I need the actual 1/4 time to get that? Thanks to all.
1st pass: 1.75 60ft
7.97 ET
89 mph
2nd pass: 1.64 60ft
7.63 ET
91 mph
3rd pass: 1.70 60ft (I spun)
7.72 ET
91 mph
4th pass: 1.63 60ft (best of the night)
7.65 ET
91 mph
I'm guessing solid 11.7's. Am I far off on my guess or in the neighborhood?
1st pass: 1.75 60ft
7.97 ET
89 mph
2nd pass: 1.64 60ft
7.63 ET
91 mph
3rd pass: 1.70 60ft (I spun)
7.72 ET
91 mph
4th pass: 1.63 60ft (best of the night)
7.65 ET
91 mph
I'm guessing solid 11.7's. Am I far off on my guess or in the neighborhood?
Going by some old time slips I have you should be around low 11.90s.
One slip I found I ran a 7.60 @ 92 in the 1/8 and it went 11.91 @ 113 in the 1/4.
I ran the car Sunday @ TCD and ran a 7.43 @ 93 in the 1/8 and 11.66 @ 116 in the 1/4.
One slip I found I ran a 7.60 @ 92 in the 1/8 and it went 11.91 @ 113 in the 1/4.
I ran the car Sunday @ TCD and ran a 7.43 @ 93 in the 1/8 and 11.66 @ 116 in the 1/4.
I have a slip where I spun a little and went a 7.61 @ 90 and it was a 11.97 @ 112 with a 1.69 60'. You should be in the 11s unless your car just falls on its face after the 1/8.
Thread Starter
11 Second Club
iTrader: (29)
Joined: May 2006
Posts: 1,933
Likes: 1
From: The Bayou State
Thanks for the replies. It pulls strong all the way through as I did make one full pass forgetting about running just the 1/8th. Car was not consistent do to first passes of the year. It should be good to go little deeper with some seat time so I'm told.
