1.5 -- 60ft -- 2000 camaro ss
08-11-2018, 10:50 PM
#21
08-11-2018, 10:59 PM
#22
TECH Junkie
I just got done watching the movie Super Troopers 2 about 10 min. ago. Just now I was reading through your sig and see 1.75 headers and plugs gapped at .7mm lol and thought to myself you must be from Canada. If you have seen the movie you would know why I got a chuckle out of it lol. A lot of metric vs standard jabs. By the way I prefer the metric system myself.
08-11-2018, 11:09 PM
#23
10 Second Club
iTrader: (8)
mike morris on here went 10s na on stock wheels na h/c car. It's not full weight but i haven't seen a actual full weight hotrod yet. You most always lose a little weight here and there if you're paying attention to whats goin on.
08-12-2018, 10:55 AM
#24
11 Second Club
be no reason to cut up your car to get there. Many bolt on cars have been faster at nearly full weight as your na times.
mike morris on here went 10s na on stock wheels na h/c car. It's not full weight but i haven't seen a actual full weight hotrod yet. You most always lose a little weight here and there if you're paying attention to whats goin on.
mike morris on here went 10s na on stock wheels na h/c car. It's not full weight but i haven't seen a actual full weight hotrod yet. You most always lose a little weight here and there if you're paying attention to whats goin on.
Your car could be faster H/C with ease with out staying bolt on.......many have.
Oh really. So line up the same car, except with a bolt on engine, & it will be faster? Lol.
Lots of guys have went 10's in SBE h/c cars. He knows. You haven't seen a actual full weight hotrod yet? You've seen less than I thought. You want a picture? Yea with a drill & hole saw bit in your hand.
08-12-2018, 11:21 AM
#27
11 Second Club
Nice job. A quality 3600 stall from companies like Yank and Circle D will literally make your all motor passes as fast as your nitrous pass and be easy to dd. With your 4.10 gears and a 3600 stall the car will drive like stock city driving. Highway driving will take a few hundred more rpm to maintain highway speeds. The car in my sig has a YankSS3600, 3.73s, full factory interior, and a/c. Drives really nice as a summer dd.
08-12-2018, 12:13 PM
#28
Nice job. A quality 3600 stall from companies like Yank and Circle D will literally make your all motor passes as fast as your nitrous pass and be easy to dd. With your 4.10 gears and a 3600 stall the car will drive like stock city driving. Highway driving will take a few hundred more rpm to maintain highway speeds. The car in my sig has a YankSS3600, 3.73s, full factory interior, and a/c. Drives really nice as a summer dd.
Thanks !!! I will check that out ... but DA makes a huge impact on N/A-- im sure i will do better in cooler weather... i had this car for only 4 months and did not have alot of good track time ... i dont want a to aggresive stall .. because i know my 7.5 rear end will go kaboom !!
08-12-2018, 12:33 PM
#29
TECH Junkie
Thanks !!! I will check that out ... but DA makes a huge impact on N/A-- im sure i will do better in cooler weather... i had this car for only 4 months and did not have alot of good track time ... i dont want a to aggresive stall .. because i know my 7.5 rear end will go kaboom !!
Im running 1.5x 60's and plan on 1.4x this fall and im not remotely worried.
08-12-2018, 05:12 PM
#31
10 Second Club
iTrader: (8)
Lol. Your dumbass couldn't read he has a shot.
Your car could be faster H/C with ease with out staying bolt on.......many have.
Oh really. So line up the same car, except with a bolt on engine, & it will be faster? Lol.
Lots of guys have went 10's in SBE h/c cars. He knows. You haven't seen a actual full weight hotrod yet? You've seen less than I thought. You want a picture? Yea with a drill & hole saw bit in your hand.
Your car could be faster H/C with ease with out staying bolt on.......many have.
Oh really. So line up the same car, except with a bolt on engine, & it will be faster? Lol.
Lots of guys have went 10's in SBE h/c cars. He knows. You haven't seen a actual full weight hotrod yet? You've seen less than I thought. You want a picture? Yea with a drill & hole saw bit in your hand.
sure post a pic.....if you're to dumb to utilize wr that's on you. Your car does absolutely nothing my lighter car can't do better.
not really
Nice job. A quality 3600 stall from companies like Yank and Circle D will literally make your all motor passes as fast as your nitrous pass and be easy to dd. With your 4.10 gears and a 3600 stall the car will drive like stock city driving. Highway driving will take a few hundred more rpm to maintain highway speeds. The car in my sig has a YankSS3600, 3.73s, full factory interior, and a/c. Drives really nice as a summer dd.
08-20-2018, 06:38 PM
#33
