Summit Fully Welded Mufflers
#1
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Highland, IN
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
![Question](https://ls1tech.com/forums/images/icons/icon5.gif)
Hey guys. I was just wondering if any one has installed these instead of going the more expensive route like Borla, Flowmaster, or Magnaflow. I've searched here and couldn't find anything about them. Some one on MonteCarloForum supposedly picked up a set, but hasn't reported back about what his thoughts were. So I've come over here to see if any body has had any experience with these and how they compare to the brand name mufflers.
LINK
Price: $33.95
Brand: Summit
Product Line: Summit® Fully Welded Mufflers
Part Type: Mufflers
Part Number: SUM-633221
Case Shape: Oval
Inlet Diameter (in): 2.250 in.
Inlet Quantity: Single
Inlet Location: Offset
Outlet Diameter (in): 2.250 in.
Outlet Quantity: Single
Outlet Location: Center
Internal Construction: Chambered
Muffler Material: Steel
Muffler Finish: Aluminized
Case Length (in): 13.500 in.
Overall Length (in): 17.000 in.
Thickness (in): 4.000 in.
Width (in): 10.000 in.
Outlet Style: Standard, without tip
Quantity: Sold individually.
Notes: Muffler is reversible.
Muffler, Welded, 2 1/4 in. Inlet/2 1/4 in. Outlet, Steel, Aluminized, Each
![](http://static.summitracing.com/global/images/prod/large/sum-633221.jpg)
Thanks!
LINK
Price: $33.95
Brand: Summit
Product Line: Summit® Fully Welded Mufflers
Part Type: Mufflers
Part Number: SUM-633221
Case Shape: Oval
Inlet Diameter (in): 2.250 in.
Inlet Quantity: Single
Inlet Location: Offset
Outlet Diameter (in): 2.250 in.
Outlet Quantity: Single
Outlet Location: Center
Internal Construction: Chambered
Muffler Material: Steel
Muffler Finish: Aluminized
Case Length (in): 13.500 in.
Overall Length (in): 17.000 in.
Thickness (in): 4.000 in.
Width (in): 10.000 in.
Outlet Style: Standard, without tip
Quantity: Sold individually.
Notes: Muffler is reversible.
Muffler, Welded, 2 1/4 in. Inlet/2 1/4 in. Outlet, Steel, Aluminized, Each
![](http://static.summitracing.com/global/images/prod/large/sum-633221.jpg)
Thanks!
#3
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Highland, IN
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is rather disappointing. I was hoping for more opinions. I guess every one is sticking to name brands.
I wanted to try to save some cash, and achieve a louder toned exhaust. Maybe I will have to be the guinea pig on this one.
I wanted to try to save some cash, and achieve a louder toned exhaust. Maybe I will have to be the guinea pig on this one.
#4
TECH Apprentice
iTrader: (1)
Join Date: Jun 2007
Location: Pittsburgh, Pa.
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![](http://i197.photobucket.com/albums/aa161/dj_stylzpgh/th_ClassicChamberedExhaust.jpg)
Classic Chambered mufflers isn't as name brand as everyone else and there is maybe a few people using it like me. You could get rid of your mufflers and save a couple lbs. and mount one where your resonator is and sound like this. People constantly ask me what I have or why I'm so loud. Even the cops talk about how nice my car sounds.
#7
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Highland, IN
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Cool.
No help on the Summit mufflers though, huh?
I just asked Professor Overdrive at Summit Racing the following question:
"I'm debating between two Summit brand mufflers, the Fully Welded (part #: SUM-633221) or the Race Mufflers (part #: SUM-638221). I was hoping that you could clarify the differences between the two types. I'm looking more toward the sound differences than performance ones, however I hope you will be able to tell me that as well. Thank you for your help and I look forward to hearing back from you!"
I will post his response once I receive it.
No help on the Summit mufflers though, huh?
I just asked Professor Overdrive at Summit Racing the following question:
"I'm debating between two Summit brand mufflers, the Fully Welded (part #: SUM-633221) or the Race Mufflers (part #: SUM-638221). I was hoping that you could clarify the differences between the two types. I'm looking more toward the sound differences than performance ones, however I hope you will be able to tell me that as well. Thank you for your help and I look forward to hearing back from you!"
I will post his response once I receive it.
Trending Topics
#8
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Highland, IN
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
To add... Here's information on the other Summit muffler model I'm considering. For those interested.
LINK
Price: $ 28.95
Brand: Summit
Product Line: Summit® Race Mufflers
Part Type: Mufflers
Part Number: SUM-638221
Case Shape: Oval
Inlet Diameter (in): 2.250 in.
Inlet Quantity: Single
Inlet Location: Offset
Outlet Diameter (in): 2.250 in.
Outlet Quantity: Single
Outlet Location: Center
Internal Construction: Chambered
Muffler Material: Steel
Muffler Finish: Aluminized
Case Length (in): 13.000 in.
Overall Length (in): 19.000 in.
Thickness (in): 4.000 in.
Width (in): 10.000 in.
Outlet Style: Standard, without tip
Quantity: Sold individually.
Muffler, Chambered, 2.25 in. Inlet, 2.25 in. Outlet, Offset Inlet, Center Outlet, Steel, Aluminized, Each
More flow equals more horsepower.
These Summit® race mufflers will give your vehicle a deep aggressive tone. Constructed from steel with an aluminized finish they are perfect for your next street/strip project. Available in multiple sizes and configurations to suit your high performance needs.
LINK
Price: $ 28.95
Brand: Summit
Product Line: Summit® Race Mufflers
Part Type: Mufflers
Part Number: SUM-638221
Case Shape: Oval
Inlet Diameter (in): 2.250 in.
Inlet Quantity: Single
Inlet Location: Offset
Outlet Diameter (in): 2.250 in.
Outlet Quantity: Single
Outlet Location: Center
Internal Construction: Chambered
Muffler Material: Steel
Muffler Finish: Aluminized
Case Length (in): 13.000 in.
Overall Length (in): 19.000 in.
Thickness (in): 4.000 in.
Width (in): 10.000 in.
Outlet Style: Standard, without tip
Quantity: Sold individually.
Muffler, Chambered, 2.25 in. Inlet, 2.25 in. Outlet, Offset Inlet, Center Outlet, Steel, Aluminized, Each
More flow equals more horsepower.
These Summit® race mufflers will give your vehicle a deep aggressive tone. Constructed from steel with an aluminized finish they are perfect for your next street/strip project. Available in multiple sizes and configurations to suit your high performance needs.
![](http://static.summitracing.com/global/images/prod/large/sum-638221_w.jpg)
#9
Staging Lane
Join Date: Mar 2009
Location: Puyallup,Washington
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
#10
Staging Lane
Join Date: Mar 2009
Location: Puyallup,Washington
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
By the looks of your car you don't spare cost on what looks good, By the way nice ride. So why go on the cheap with your exhaust mufflers. Yea there's extra cost you get the Stainless Steel Magnaflows but they do stand behind there products and they LAST. Just my two cents.
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I put 2 summit welded mufflers on my z71, it has headers, no cats, duals with an h pipe dumped at the axle. I was very disapointed in the sound and quality of the muffler. I was hoping for a flowmaster type sound but instead it had an odd ugly sound kind of like a turbo muffler that had a baffle loose at higher rpms. And to top it off after about 3 weeks of driving the mufflers actually ripped in a few spots. The muffler shop welding 2 hangers on each muffler and where the hangers were attached, the cases just ripped apart. This was not due to poor hanger placement or bad welding. It was due to the mufflers having very thin poor quality metal housing IMO...
#14
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Highland, IN
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I put 2 summit welded mufflers on my z71, it has headers, no cats, duals with an h pipe dumped at the axle. I was very disapointed in the sound and quality of the muffler. I was hoping for a flowmaster type sound but instead it had an odd ugly sound kind of like a turbo muffler that had a baffle loose at higher rpms. And to top it off after about 3 weeks of driving the mufflers actually ripped in a few spots. The muffler shop welding 2 hangers on each muffler and where the hangers were attached, the cases just ripped apart. This was not due to poor hanger placement or bad welding. It was due to the mufflers having very thin poor quality metal housing IMO...
I really do not want it that loud. Obviously louder than stock, but I don't want to **** off the neighbors and wake their new born baby. I'm going with just a muffler replacement. The $600 for the Magnaflow cat-back is just way too much in my opinion. I understand that it's an extremely good quality product, by I do try to save money here and there without sacrificing quality.
Thanks again for your review Zaner.
#15
Launching!
Join Date: Apr 2009
Location: FONTANA CA, 909 "IE"
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here's what my Magnaflows sound like.
http://www.youtube.com/watch?v=atts_kSMd5o
http://www.youtube.com/watch?v=atts_kSMd5o
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#16
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thank you. I appreciate your input. I will have to keep this in mind. I definitely do not want this to happen.
I really do not want it that loud. Obviously louder than stock, but I don't want to **** off the neighbors and wake their new born baby. I'm going with just a muffler replacement. The $600 for the Magnaflow cat-back is just way too much in my opinion. I understand that it's an extremely good quality product, by I do try to save money here and there without sacrificing quality.
Thanks again for your review Zaner.
I really do not want it that loud. Obviously louder than stock, but I don't want to **** off the neighbors and wake their new born baby. I'm going with just a muffler replacement. The $600 for the Magnaflow cat-back is just way too much in my opinion. I understand that it's an extremely good quality product, by I do try to save money here and there without sacrificing quality.
Thanks again for your review Zaner.
#17
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Highland, IN
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, the tips I want are more expensive than the mufflers I'm looking at.
The guy who usually works on our family's cars told me he wouldn't be able to weld everything up for me because he doesn't have stainless welding materials. He mentioned using exhaust clamps for the mufflers and tips though. Would this work OK or should I stick to having a shop weld everything together? Pros and cons? Thanks guys!
The guy who usually works on our family's cars told me he wouldn't be able to weld everything up for me because he doesn't have stainless welding materials. He mentioned using exhaust clamps for the mufflers and tips though. Would this work OK or should I stick to having a shop weld everything together? Pros and cons? Thanks guys!
#18
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i have mine clamped no problems to report. I already have the magnaflow and think it was overpriced too. what if you replaced your resonator with one from a slp loudmouth and then pull the mufflers off completely and just run pipe outback? think it would sound like a ls1 camaro? i would do it but already paid a ton for the magnaflow. they have used loudmouths in the sale section on here