LT1 B-body caprice classic in the 12's
03-26-2009, 05:33 PM
#1
Teching In
Thread Starter
Join Date: May 2007
Location: wichita, ks and tulsa,ok
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
LT1 B-body caprice classic in the 12's just wanted to say i made it !!! running 1st 12.87 @108, 2nd 12.73@109 3rd and best time of 12.67@109mph
04-04-2009, 09:58 PM
#5
Teching In
Thread Starter
Join Date: May 2007
Location: wichita, ks and tulsa,ok
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
rebuilt trans with 3600 yank stall, rebuilt rearend eaton posi 31 spline axles stock gear 342, 25" tall bfg drag radials, 58mm nos t/b, long tube headders with flow master 40's dumps at the pumkin cover,msd ign/ dist., 125shot nos on msd window switch..... i have still to put on AFR 180 heads, 1.6 rockers, cam and wal 255 fuel pump a aero fuel pressure reg...shooting for low 11's or high 10's
04-05-2009, 10:15 AM
#6
Nice to see another boat makin' time!
We're shootin' for 10.30's or .40's @ 130 with our 4600lb. FULL ON street car on 17" radials.
Prob'ly only go a .50 though! lol. The MPH will be there but man it's hard to get this thing moving! It's lowered and has a full compliment of Hotchkiss suspension mods.
Last fall went 10.86 @ 124.
YOU GONNA NEED A LOT OF SPRAY TO GO 10's!!!!
(We're using 400+).
Good luck!
We're shootin' for 10.30's or .40's @ 130 with our 4600lb. FULL ON street car on 17" radials.
Prob'ly only go a .50 though! lol. The MPH will be there but man it's hard to get this thing moving! It's lowered and has a full compliment of Hotchkiss suspension mods.
Last fall went 10.86 @ 124.
YOU GONNA NEED A LOT OF SPRAY TO GO 10's!!!!
(We're using 400+).
Good luck!
