aliwantsnss

iTrader: (1)

OK well I have been a lurker for a while, but I think I'm doing this right. My first 12 sec pass was at Atco about a month ago. I went 12.53 @ 110 on a 1.9 60 ft. I am not the best driver in the world, and don't have much seat time. This was run with a full interior on BFG DRs. I went and got the car dynoed after that day, and the numbers were quite impressive. My car is untuned, and put down 352 RWHP and 370 RWTQ.

After that, I figured the car has more than a 12.5, so I let a friend take some passes. His best was 12.271 @ 114.01 on a 1.82 60 ft. He was riding the clutch to try to save the stock 10 bolt. I am going to order my 12 bolt tomorrow, but plan to hit Atco one last time to see what some weight reduction and no fear of breaking the rear will do before the install.

jdustu

iTrader: (2)

nice work dude

aliwantsnss

iTrader: (1)

I'm not a dude.

jdustu

iTrader: (2)

dude....i call my wife dude too sorry!

WJ SOM SS

iTrader: (11)

What girly bolt-ons do you have? Also, do you know your receweight? Nice times.... WJ

aliwantsnss

iTrader: (1)

Mods are in sig, weighs about 3550 w/ driver.

KB99WS6

iTrader: (6)

very nice numbers all around. What did you do to lighten the car?

Tom the roofer

iTrader: (9)

Very nice Congrats. Do you have plans to hit the 11's?

aliwantsnss

iTrader: (1)

I took the jack and spare out about a year ago. I piled enough extra clothes and shoes and receipts and change and CDs to make up for my slight weight reduction.

aliwantsnss

iTrader: (1)

The 12 bolt is ordered, and the 4:11s should wake it up. I think Im gonna actually do some real weight reduction, and see what can happen w/ the 10 bolt before the install. The 12.2 was run on a 1.8 60 ft, so I think there is more to be had. I have more faith in the clutch than the rear right now...

KB99WS6

iTrader: (6)

Funny how you are looking to "wake it up" lol. 12.2@114 for a full weight bolt-on fbody, and the guy was going easy to save the 10bolt?? Thats pretty amazing if you ask me. I see a lot of guys w all the same bolt-on's + a cam not doing as well. I'd say your car is not only woken up but pissed off, lol.

Is your car a stripper? Happen to know the raceweight?

aliwantsnss

iTrader: (1)

Well its not full bolt on, I dont have TB Tstat and all that stuff or tuning. I did not weigh the car at Atco that nite, but I did weigh it at etown a few days later w/ the same set up. It weighed 3550 with me in it, so add a few pounds for the guy who made the 12.2 pass. My car has t-tops so its no stripper! A 1.8 60 ft isnt someone going all out! Several people have said my car is a bit freakish, esp with the torque it put down. Its as high as some cammed cars!

KB99WS6

iTrader: (6)

12.2@114 w/your mods is definitely freakish.

Tiger2o69

iTrader: (16)

The torque seems high even compared to the hp.

Kent1

Nice time for mods you have. My best time was about two weeks ago with full boltons with a 4200 Yank with full interior? A car that had a cam barely outran mine by 1/2 a car lenght. Car setup a year and a half and the more I ran it, the better it got. Good luck with your setup...

tuff

iTrader: (15)

I think you need a cam i have a g5x2 for you . You want to go fast dont ya

Kent1

YOU BET!!!

Tom the roofer

iTrader: (9)

Well good luck and keep us updated.

compuvision02

because shes the male of the relationship.

CamTom12

iTrader: (1)

I'm with KB99WS6... I had to put a cam in before I got a 115 trap. And that was a freakish run for me.