02TaOwner

Went to the track last night. I have an SLP air lid, 85 mass airflow, smooth bellow, a cut out, TCI SSF 3500, bfg drag radial @ 18psi. Here are my two runs

Track DA was at 3240

First run
I stalled the car to about 1500 RPM

RT: .593
60ft. 1.7235
1/8 8.1902 @ 83.41
1/4 12.937@ 103.23

Secound run

RT: .525
60ft. 1.7403
1/8 8.2038 @ 83.71
1/4 12.9399 @ 103.45

s346k

iTrader: (4)

nice..

with a lid, 4k stall, and 373s i ran 8.18 @ 80 mph...on the stock tune.

since then i've added some stuff, i hope to be sub 12.5 now

mpe488

your DA must really hurt man. Here at sea level I'd hope for 12.9 with lid, cut-out and 25% pullies.

02TaOwner

Yeah the DA level always sucks here. 3200's is the best we see around here. I'm hoping for a 12.6 at the other track, too bad its to far and I'm not driving tor 2 1/2 hours for that. I will have this on my next to do list: ASP pulley, longtube headers and 3.73's, and a custom tune.