12.1 @ 109 Video
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Sep 2005
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
12.1 @ 109 Video
Went out to Montgomery Motorsports Park today to test out the new stall converter. There weren't that many people out there so we got plenty of runs. Ran a 12.189 @ 109.22. I had a couple of better 60's, but that was my best ET. I'm knocking on the door of the 11's. I've got a NOS wet kit waiting to be installed. However I would like to run an 11 n/a.
Video of the 2 fastest runs of the day for me...
http://gallery.mac.com/academytim#100197
On my first pass I busted a Viper. His ET was ever so slightly faster than mine, but I got the hole shot and won by about a tenth.
http://gallery.mac.com/academytim#100203
Video of the 2 fastest runs of the day for me...
http://gallery.mac.com/academytim#100197
On my first pass I busted a Viper. His ET was ever so slightly faster than mine, but I got the hole shot and won by about a tenth.
http://gallery.mac.com/academytim#100203
#3
Teching In
Thread Starter
iTrader: (3)
Join Date: Sep 2005
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
I was stalling to about 1500 rpm and then flooring it. I've heard that its easier on your rear end if you don't shock it off the line so much. I tried to stall it up a little higher a couple of times, but I would just spin really bad. I guess I'll need a little more rubber to get a faster 60'. I'm running 255/50/16 MT ET Street Radials at the moment. However, I did peel off about a pound of rubber off the back end of my car tonight, so it looks like I'll be tire shopping before too much longer.
#7
Teching In
Thread Starter
iTrader: (3)
Join Date: Sep 2005
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I did have better 60's throughout the day (I think my best was a 1.65), but that was the fastest ET. I may try flashing the stall the next time out just to see what it does. I really need to do some suspension work to get that 60' much lower though. I have absolutely no suspension mods whatsoever.