rod bolt ferrules
#1
TECH Regular
Thread Starter
iTrader: (10)
Join Date: Jan 2004
Location: Green Bay, WI
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
rod bolt ferrules
How hard do you have to pull before the rod bolt ferrules come out? My motor has been apart before and the mechanic could have taken them out then but im not sure. I removed one rod bolt at a time and havent seen a single ferrule. I dont know what they look like, but nothing is pulling out.
#4
Launching!
iTrader: (25)
Join Date: Jan 2006
Location: Hamilton Twp, NJ
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Lithium
leave the bolt threaded in still a little bit and give it a good tug...should come out.
Chris
#6
Originally Posted by 1QWIKBIRD
I just swapped out the bolts on my 99 formula with some Katech bolts, and I saw no ferrules?? motor is still on stand should I double check? what years are they in???
Chris
Chris
I am doing the same thing in my 99 Camaro SS, I have the first one out and no Ferrules, Here are some pics of my bolts.
Dan
#7
when I pulled the rod bolts out of my rods I saw no ferrules. Mine is a 2000 block....I think...anyway to know what year a block is from for sure? It has an open oil valley in the front of the motor like 99+ blocks should have...
I do remember the bolt getting loose and then tight again when I was backing out the bolts out of the rods... Maybe that was them....
anyways im putting arp bolts back in so I need to take the ferrules out right?
I do remember the bolt getting loose and then tight again when I was backing out the bolts out of the rods... Maybe that was them....
anyways im putting arp bolts back in so I need to take the ferrules out right?
Trending Topics
#8
TECH Resident
iTrader: (12)
Originally Posted by 92zcamaroperson
when I pulled the rod bolts out of my rods I saw no ferrules. Mine is a 2000 block....I think...anyway to know what year a block is from for sure? It has an open oil valley in the front of the motor like 99+ blocks should have...
I do remember the bolt getting loose and then tight again when I was backing out the bolts out of the rods... Maybe that was them....
anyways im putting arp bolts back in so I need to take the ferrules out right?
I do remember the bolt getting loose and then tight again when I was backing out the bolts out of the rods... Maybe that was them....
anyways im putting arp bolts back in so I need to take the ferrules out right?
#10
TECH Resident
iTrader: (12)
Originally Posted by SLPSS99
I am doing the same thing in my 99 Camaro SS, I have the first one out and no Ferrules, Here are some pics of my bolts.
Dan
Dan
#11
Launching!
iTrader: (25)
Join Date: Jan 2006
Location: Hamilton Twp, NJ
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SLPSS99
I am doing the same thing in my 99 Camaro SS, I have the first one out and no Ferrules, Here are some pics of my bolts.
Dan
Dan
Chris