Who has a Strange S60 rear end?
Thread Starter
TECH Fanatic
Joined: Oct 2007
Posts: 1,129
Likes: 0
From: Ventura County, California
Who has a Strange S60 rear end? Who has them and with what internals and any complaints?
I am thinking of getting a 40 spline gun drilled, spool with street gear.
Anyone have any problems racing on these?
I am thinking of getting a 40 spline gun drilled, spool with street gear.
Anyone have any problems racing on these?
i have the s60,with the detriot trutrac,33 spline, longer studs,c-clip elinmaters,had the 410 gears,the only complain i had was it was noisy as hell,until i changed the gears out and put motive 373 gears,now its quiet.did it myself,also i have launched it at about 5600 with no problems at all
Thread Starter
TECH Fanatic
Joined: Oct 2007
Posts: 1,129
Likes: 0
From: Ventura County, California
That's the next thing I have to figure out is how much I want to narrow it because I have a lot of clearance 17" to the tubs and actually 16 3/4" to the shock/LCA.
My shock will mount on the same bracket as my LCA bracket right above the LCA is where the shock will mount.
Who has photos of a 315 60 15 on a 15x12 or same size tire on 15x12???
I want mine to tuck in. I want about 3/4" clearance on the inside so that will give me 2" of clearance from the fender lip which should tuck it in pretty good and let me lower it some.
My shock will mount on the same bracket as my LCA bracket right above the LCA is where the shock will mount.
Who has photos of a 315 60 15 on a 15x12 or same size tire on 15x12???
I want mine to tuck in. I want about 3/4" clearance on the inside so that will give me 2" of clearance from the fender lip which should tuck it in pretty good and let me lower it some.
Trending Topics
Thread Starter
TECH Fanatic
Joined: Oct 2007
Posts: 1,129
Likes: 0
From: Ventura County, California
I have to narrow mine more than 2.5" per side I am going to run a 12" wide rim and want the tire to tuck.
I will end up with 5-6" per side would be my guess with the back space I want to run.
I will end up with 5-6" per side would be my guess with the back space I want to run.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
i"ve sold several of them and the only complaint i've heard is about the noise. it seems as if the Dana Corp. gears that Strange is installing has been the problem. maybe if you buy one request that Strange installs a Motive or better yet, US Gear brand. anyone intersted in these or other rearends, pm me for a quote. i have the best prices by far for all of them, including the new bolt-in fabricated 9 inch.
Thread Starter
TECH Fanatic
Joined: Oct 2007
Posts: 1,129
Likes: 0
From: Ventura County, California
i"ve sold several of them and the only complaint i've heard is about the noise. it seems as if the Dana Corp. gears that Strange is installing has been the problem. maybe if you buy one request that Strange installs a Motive or better yet, US Gear brand. anyone intersted in these or other rearends, pm me for a quote. i have the best prices by far for all of them, including the new bolt-in fabricated 9 inch.
Thanks for the tip.
I twisted both axles with 280 miles on my s60. Im getting another set form strange, they said my old ones were fine? I was hoping there were soft or some defect that shouldn't happen again? So I guess I just have to cross my fingers, and hope it dosn't happen agian, sence no problem was found or fixed. I have 330whp, I spend a LOT of money on this rearend. It is not even funny how overkill this rear end should be for my car, my stock 10 bolt was fine. I raced on it all the time.
http://i2.photobucket.com/albums/y11...n/P1020521.jpg
http://i2.photobucket.com/albums/y11...n/P1020509.jpg
http://i2.photobucket.com/albums/y11...n/P1020516.jpg
http://i2.photobucket.com/albums/y11...n/P1020530.jpg
http://i2.photobucket.com/albums/y11...n/P1020521.jpg
http://i2.photobucket.com/albums/y11...n/P1020509.jpg
http://i2.photobucket.com/albums/y11...n/P1020516.jpg
http://i2.photobucket.com/albums/y11...n/P1020530.jpg
I twisted both axles with 280 miles on my s60. Im getting another set form strange, they said my old ones were fine? I was hoping there were soft or some defect that shouldn't happen again? So I guess I just have to cross my fingers, and hope it dosn't happen agian, sence no problem was found or fixed. I have 330whp, I spend a LOT of money on this rearend. It is not even funny how overkill this rear end should be for my car, my stock 10 bolt was fine. I raced on it all the time.
http://i2.photobucket.com/albums/y11...n/P1020521.jpg
http://i2.photobucket.com/albums/y11...n/P1020509.jpg
http://i2.photobucket.com/albums/y11...n/P1020516.jpg
http://i2.photobucket.com/albums/y11...n/P1020530.jpg
http://i2.photobucket.com/albums/y11...n/P1020521.jpg
http://i2.photobucket.com/albums/y11...n/P1020509.jpg
http://i2.photobucket.com/albums/y11...n/P1020516.jpg
http://i2.photobucket.com/albums/y11...n/P1020530.jpg
Kyle