W2W 1993 Camaro Build (updated 4-25-08)
Thread Starter
TECH Junkie
iTrader: (3)
Joined: May 2003
Posts: 3,898
Likes: 6
From: Clayton, North Carolina
11-7-07 The car has been sitting for a bit, and has taken another turn. Jeff has a few new ideas, and she is back on the plate getting a new front suspension with a Corvette flair.
I attached a few pics with the drag radial tire/rim package on the rear to show that look.
Kurt
I attached a few pics with the drag radial tire/rim package on the rear to show that look.
Kurt
Thread Starter
TECH Junkie
iTrader: (3)
Joined: May 2003
Posts: 3,898
Likes: 6
From: Clayton, North Carolina
Update 1-9-08 The front cowl area is getting closed out. You can see in one picture the end of the 3/8 tube that the fab guy (Mike) works off of to make the shape. The metal finish looks great in person, hope the pictures help.
Soon the parts for the front Corvette suspension will all be here, and that work will start.
Kurt
Soon the parts for the front Corvette suspension will all be here, and that work will start.
Kurt
Thread Starter
TECH Junkie
iTrader: (3)
Joined: May 2003
Posts: 3,898
Likes: 6
From: Clayton, North Carolina
4-25-08 The Corvette control arms are here and the fitment is underway. The engine and trans has been raised up so the car can get lower, this has caused a re-work of the floor to clear the trans and driveshaft in the new location. the upper control arm mounts are in process now. This car is going to be very cool when done!
Kurt
Kurt
