4L60E from 4wd for 2wd corvette
03-31-2016, 09:44 PM
#1
Teching In
Thread Starter
Join Date: Mar 2016
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
4L60E from 4wd for 2wd corvette So, I plan to put an LS1 from a tahoe into a 78 vette. Is it possible to use the stock 4L60E transmission ? What would I need to adapt the transmission to go straight to the drive shaft instead of the transfer case?
Otherwise...does anyone know if the stock 700R4 Trans will bolt direct to the 5.3l LS1?
Any help would be great!
Otherwise...does anyone know if the stock 700R4 Trans will bolt direct to the 5.3l LS1?
Any help would be great!
Another 
04-09-2016, 10:10 AM
#3
Teching In
Thread Starter
Join Date: Mar 2016
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for not understanding the structure of the forum...Based on the available options (welcome, featured vehicles, performance, etc), I could not determine the correct forum to post it to, so it seemed the engineering section would be the most appropriate.
If you could direct me to the correct forum or sub section that would be helpful.
I apologize for the inconvenience of the readers, just looking for some helpful recommendations from the collective wisdom of the group.
If you could direct me to the correct forum or sub section that would be helpful.
I apologize for the inconvenience of the readers, just looking for some helpful recommendations from the collective wisdom of the group.
