LS1TECH - Camaro and Firebird Forum Discussion
before b.o.v
before b.o.v
0 2009/10/16 10:40:44
1200HP kit
1200HP kit
0 2009/10/16 10:40:44
W2A components
W2A components
0 2009/10/16 10:40:44
Heat exchanger
Heat exchanger
0 2009/10/16 10:43:15
10" Fans
10" Fans
0 2009/10/16 10:43:15
Bosch Water pump
Bosch Water pump
0 2009/10/16 10:43:15
Had to cut the air deflector
Had to cut the air deflector
0 2009/10/16 10:45:38
where I wanted to try and stick the heat exchanger but it wouldn't fit
where I wanted to try and stick the heat exchanger but it wouldn't fit
0 2009/10/16 10:45:38
yeh this side either
yeh this side either
0 2009/10/16 10:45:38
this is where the intercooler is going to go
this is where the intercooler is going to go
0 2009/10/16 10:48:42
intercooler placing
intercooler placing
0 2009/10/16 10:48:42
underneath the horns is where the pump is going to go
underneath the horns is where the pump is going to go
0 2009/10/16 10:48:42
the bolt screw on the left has to be shaved
the bolt screw on the left has to be shaved
0 2009/10/16 10:52:15
front bumper off with the support cut for the heat exchanger
front bumper off with the support cut for the heat exchanger
0 2009/10/16 10:52:15
cousin holding the heat exchanger in place
cousin holding the heat exchanger in place
0 2009/10/16 10:52:15
heat exchanger in place
heat exchanger in place
0 2009/10/16 10:55:15
intercooler in place the old STS K-member turned sideways into it (black pipe temporary pcv to move the car so i can get the whole pipe from under driver-side to the intercooler done)
intercooler in place the old STS K-member turned sideways into it (black pipe temporary pcv to move the car so i can get the whole pipe from under driver-side to the intercooler done)
0 2009/10/16 10:55:15
the pump in place
the pump in place
0 2009/10/16 10:59:47
differnt angle of the pipe into the intercooler the b.o.v is being moved but the pipe blew off at 100mph so it's got to go
differnt angle of the pipe into the intercooler the b.o.v is being moved but the pipe blew off at 100mph so it's got to go
0 2009/10/16 10:59:47
different angle the pcv is going and so is the STS pipe. they are getting merged into one piece
different angle the pcv is going and so is the STS pipe. they are getting merged into one piece
2 2009/10/16 10:59:47
from the intercooler to the STS charge/intake pipe
from the intercooler to the STS charge/intake pipe
0 2009/10/16 11:03:23
heat exchanger with the front bumper on
heat exchanger with the front bumper on
0 2009/10/16 11:03:23
new place for the blow off valve
new place for the blow off valve
0 2009/10/16 11:03:23
welded a small bracket to help hold up the pipe under the driver side to the intercooler
welded a small bracket to help hold up the pipe under the driver side to the intercooler
0 2009/10/16 11:05:58
the front of the pipe going into the intercooler
the front of the pipe going into the intercooler
0 2009/10/16 11:05:58
pipe going into the intercooler made the bracket to help with the weight of the intercooler for just in case purposes
pipe going into the intercooler made the bracket to help with the weight of the intercooler for just in case purposes
0 2009/10/16 11:05:58
how it looks from the front
how it looks from the front
0 2009/10/16 11:09:06
wiring and ground for the heat exchanger and pump
wiring and ground for the heat exchanger and pump
0 2009/10/16 11:09:06
where I temporary put the switch for the pump and heat exchanger fan
where I temporary put the switch for the pump and heat exchanger fan
0 2009/10/16 11:09:06
0 2009/12/25 23:04:25
0 2009/12/25 23:04:25
0 2009/12/25 23:04:25
0 2018/10/03 12:15:27
dyno that is rough at the top and not sure if it matches any of the logs
dyno that is rough at the top and not sure if it matches any of the logs
0 2018/10/03 20:42:34
0 2018/10/04 15:24:59
0 2018/10/04 15:25:30
earlier dyno
earlier dyno
0 2018/10/04 15:26:17
0 2018/10/04 15:27:29
0 2018/10/04 15:28:52