Lots of bling thanks to Specialized Stainless...
10-11-2008, 03:45 AM
#1
Launching!
Thread Starter
Join Date: Oct 2005
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Lots of bling thanks to Specialized Stainless... I know it may not be everybody's thing but:
here's the outside:
A couple of pics with the pulley :
With Cover
sorry, I just had a hard time picking out of the like 30 pics which ones I wanted here! I do take most of this stuff off when driving, this is mainly for shows and meets.
here's the outside:
A couple of pics with the pulley :
With Cover
sorry, I just had a hard time picking out of the like 30 pics which ones I wanted here! I do take most of this stuff off when driving, this is mainly for shows and meets.
! 
10-11-2008, 01:19 PM
#6
FormerVendor
iTrader: (15)
Join Date: Jun 2006
Location: Los Angeles, CA
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
Looks really good man! That power steering cover flows with your engine bay perfectly. Thank you for the new pictures, I'll update our customer car's page now. 
Trending Topics
10-11-2008, 06:29 PM
#13
Launching!
Thread Starter
Join Date: Oct 2005
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys !! ok .....
Specialized: I'm actually going to send you the higher rez and slightly bigger pics via email. I will send right now! BTW Specialized Stainless is really top notch! Their customer service is ridiculously spot on second to none! Their products are worth every cent. I cant stress how great they are! Thanks guys!
Insaneauto86 : The Frc's look white but they're not they are actually REAL aluminized carbon fiber so they're kinda silver. I got them from a guy who used to be a seller here and did carbon covers for intakes! I don't know what happened to him, he may still be here. But he was also on ebay. They look alot better in real life and the stainless metal CAMARO strip came from Specialized Stainless
Venom WS7 I'm thinkin about either one of those As far as the lid goes, I used to have a carbon fiber one, it never fit right. I love my Volant tho so its here to stay
FatDave The hood is after market, so its fiberglass. The stock struts are ment for steel hoods so they are strong, when closing my hood I could see that the middle of the hood was bending ALOT before closing. So I depressurized them with the holes and use pins to hold them up. The chains are so I don't lose the pins. I actually am going to change the chains out for the wire thats used on exterior hood pins
Specialized: I'm actually going to send you the higher rez and slightly bigger pics via email. I will send right now! BTW Specialized Stainless is really top notch! Their customer service is ridiculously spot on second to none! Their products are worth every cent. I cant stress how great they are! Thanks guys!
Insaneauto86 : The Frc's look white but they're not they are actually REAL aluminized carbon fiber so they're kinda silver. I got them from a guy who used to be a seller here and did carbon covers for intakes! I don't know what happened to him, he may still be here. But he was also on ebay. They look alot better in real life and the stainless metal CAMARO strip came from Specialized Stainless
Venom WS7 I'm thinkin about either one of those
As far as the lid goes, I used to have a carbon fiber one, it never fit right. I love my Volant tho so its here to stayFatDave The hood is after market, so its fiberglass. The stock struts are ment for steel hoods so they are strong, when closing my hood I could see that the middle of the hood was bending ALOT before closing. So I depressurized them with the holes and use pins to hold them up. The chains are so I don't lose the pins. I actually am going to change the chains out for the wire thats used on exterior hood pins
10-11-2008, 06:33 PM
#14
TECH Junkie
iTrader: (10)
Join Date: Jan 2004
Location: Pearland, TX
Posts: 3,779
Likes: 0
Received 0 Likes
on
0 Posts
The ONLY thing I don't like are the fuel rail covers. They're nice, but I've just never been a fan of them, even on Corvettes.
Everything else is REALLY tasty.
-Mike
Everything else is REALLY tasty.
-Mike
10-11-2008, 08:50 PM
#16
TECH Fanatic
iTrader: (9)
Join Date: Jun 2004
Location: Ewing NJ
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
Your sticker is peeling on the drivers side fender and emblem pros makes a set in stainless with your info etched on it. I like the aluminized frc but I think if you were to paint or powdercoat the fast a different color there would be a nicer contrast. Its because you have so much done under the hood it gets a little lost in the mix. Maybe a mirrored black would work. I know one of our sponsors here can powdercoat the plastic intakes I think it is powder pro but I can't remember his name sorry. Again you have a very nice car with a lot of attention to detail.
10-12-2008, 11:10 AM
#19
TECH Apprentice
Join Date: Nov 2004
Location: Kitchener, Ontario, Canada
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys !! ok .....
FatDave The hood is after market, so its fiberglass. The stock struts are ment for steel hoods so they are strong, when closing my hood I could see that the middle of the hood was bending ALOT before closing. So I depressurized them with the holes and use pins to hold them up. The chains are so I don't lose the pins. I actually am going to change the chains out for the wire thats used on exterior hood pins
FatDave The hood is after market, so its fiberglass. The stock struts are ment for steel hoods so they are strong, when closing my hood I could see that the middle of the hood was bending ALOT before closing. So I depressurized them with the holes and use pins to hold them up. The chains are so I don't lose the pins. I actually am going to change the chains out for the wire thats used on exterior hood pins
http://www.orrorr.com/productNEW.asp...82D50}&IID=758
10-12-2008, 07:41 PM
#20
Launching!
Thread Starter
Join Date: Oct 2005
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Your sticker is peeling on the drivers side fender and emblem pros makes a set in stainless with your info etched on it. I like the aluminized frc but I think if you were to paint or powdercoat the fast a different color there would be a nicer contrast. Its because you have so much done under the hood it gets a little lost in the mix. Maybe a mirrored black would work. I know one of our sponsors here can powdercoat the plastic intakes I think it is powder pro but I can't remember his name sorry. Again you have a very nice car with a lot of attention to detail.
Yeah I'm gonna get the intake done either in gloss black or near chrome. One of the two.