Coil relocation and some other minor engine bling mods!
#1
Staging Lane
Thread Starter
Join Date: Nov 2002
Location: Joliet IL
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Coil relocation and some other minor engine bling mods!
Installed a clear lid, did the coil relocation mod using the Thunder Racing kit that includes all hardware and custom cut wires, painted the valve covers and did the passanger side wire hide mod (thanks goes to Andy for that idea.)
you can see the bracket for the coils up under the cowl.
Drivers side view.
Chris
you can see the bracket for the coils up under the cowl.
Drivers side view.
Chris
#3
Staging Lane
Thread Starter
Join Date: Nov 2002
Location: Joliet IL
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Re: Coil relocation and some other minor engine bling mods!
Thanks Andy, it's nowhere near the league of Red but it's alot cleaner and you can actually get to most everything from the top now even the passanger side rear plug!!!
#5
Staging Lane
Thread Starter
Join Date: Nov 2002
Location: Joliet IL
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Re: Coil relocation and some other minor engine bling mods!
Mark, not without some heavy cutting on the back side of them. I have a set of Carbon Fiber ones that I had on there, I might try to make them work, or just sell them. That is why I decided to paint the valve covers. Hope this helps.
Chris
Chris
Trending Topics
#8
LS1Tech Co-Founder
iTrader: (38)
Re: Coil relocation and some other minor engine bling mods!
Looks nice Chris. I'd ditch both K&N decals, it would make those inner fenders look even cleaner. Besides, the rednecks around here stick those decals on their dooley windows to let you know of their "high performance mod" lol.
Tony
Tony
#12
TECH Senior Member
iTrader: (16)
Re: Coil relocation and some other minor engine bling mods!
Looks Awesome. I have the TR Relocation kit still in its box. Can't wait to put it all together. Can you post some upclose pics of the brackets and coils and plug wire routing so I can get a rough idea. I read TR install instructions but they are tough to follow after messing with parts cleaning solvent all day
Thanks,
J
jsbird98@comcast.net if you want to send pics here instead.
Thanks,
J
jsbird98@comcast.net if you want to send pics here instead.
#15
Re: Coil relocation and some other minor engine bling mods!
Since the coils are no longer going to be mounted on the valve covers, have you considered shaving the mounts on them and making them flat and smooth? I saw one person do it on here, looked good.