SS Emblems
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: Oklahoma City, OK
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
SS Emblems
A couple weeks ago I had a new front bumper painted and put on my SS. When they did it, they had to blend everything onto the fenders and re-clear them. They had to take off the SS emblems, but they didn't get any measurements before they did. Can anyone give me some good measurements? Like how far up from the body molding, how far from the edge of the fender, how far apart, etc. Thanks in advance!
#2
TECH Regular
iTrader: (4)
i just checked on the driver side
i got one inch up from the top of the mold line for the s closest to the door
The s closest to the front of the car sits 1 1/8 of an inch above the mold line (slightly above the other S)
3 inch from the door with a quarter inch gap between the S S
i got one inch up from the top of the mold line for the s closest to the door
The s closest to the front of the car sits 1 1/8 of an inch above the mold line (slightly above the other S)
3 inch from the door with a quarter inch gap between the S S
Last edited by kevin99hoss; 05-03-2009 at 01:12 AM.
#3
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: Oklahoma City, OK
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Sweet, thanks man. I really don't want to spend the money to get new ones, so I think I'm going to use my old ones. Anyone have any idea on what kind of adhesive to use?