97ramsst

iTrader: (162)

Has anybody ever seen a 25th Aniv style stripe on a LT1 WS6 hood? If so how was it done and where can I get one???

These are the style stripes I am talking about:

RyanSws6

iTrader: (72)

I've seen the real 25th and a white LT with the 25th stripe. I have a 94 TA that I've been kicking around if I should paint it white then do the blue stripes. I saw one guy with the LT ram air hood, as the stripe hits the ram air inlets, he cut where the holes are and continued on the small surface between both holes and once it ends on the hood the bumper has the wide part again. I may do it. Not sure. I would paint my WS6 rims white to go along with the theme...Phoenix graphics is great and helped me get the 2 T-top stripes I needed.

1995blacktattop

iTrader: (2)

the comp t/a had a charcoal gray stripe similar to the 25th ann.


and here's a 25th t/a with a WS6 hood

Spd-Kilz

iTrader: (35)

Robbie. I know that I have seen one on this board. I just checked through my "LT1" folder on the computer with no success.

I can remember the picture, too. It was a white LT1 TA at the end of a street, in front of a gorgeous house. The car had TT2s, and a white roll bar inside. I'm almost positive it had a WS6 hood on it.

I hope that someone saved that picture.

97ramsst

iTrader: (162)

The Comp TA stripe is exactly what we are looking for...even the right color. Does anybody know where you can get a set of them (knock offs...I am sure I dont want to pay for real ones!)

RyanSws6

iTrader: (72)

I needed 2 T-top stripes for the 30th since GM doesn't make any stripe kits. I found Phoenix Graphics. Good guy.

hitmanws6

iTrader: (20)

you just missed a real Comp TA stripe for cheap on ebay a few months back, ill try to find the seller for you