Tim L's pewter trans am
 

<img src="http://www.soslow.cz28.com/slide_shows/Trans_Am_Pictures/PB240007.jpg" alt=" - " />

Re: Tim L's pewter trans am
 

eibach pro kit, 15X3.5 and 15X10 prostars.


<img src="http://www.soslow.cz28.com/slide_shows/Trans_Am_Pictures/p8310011.jpg" alt=" - " />

Re: Tim L's pewter trans am
 

all i can say is sweeeeeeeeet <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Re: Tim L's pewter trans am
 

How does the car 60'? I have the pro kit on my car and I can only get a 1.60 60'on my ET Streets. I was going to reinstall my stock springs to try and get a better 60'. I was going to cut 1 coil on the front and take the rubber spacer out of the rear.

Jim

Re: Tim L's pewter trans am
 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by FastMover:
<strong> How does the car 60'? I have the pro kit on my car and I can only get a 1.60 60'on my ET Streets. I was going to reinstall my stock springs to try and get a better 60'. I was going to cut 1 coil on the front and take the rubber spacer out of the rear.

Jim </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">My best 60' on BFG Drag Radials has been a 1.61 this past November at the Thunder Shootout..That was leaving at idle with 3.42's in the car and the QA1's set at 4 on the rear..

I have tried ET Drags but chewed up a 3.73 ring gear but I blamed that to a set of used gears I bought with no telling how many passes on them.

Mike convinced me to go with 4.10's and thats what is in the car now and will finally get to run the car the 18th at Hallsville Texas..

If anyone is near or around Hallsville on January the 18th the Louisiana Fastest Streetcar Association is having one of there races there..Go here for more details..
www.racepics.net