|
Interior + Courtesy LED's Finished Only ran out to grab one pic! Tapped into the wires at the rear view, the BCM wires started to piss me off. :lol: http://i11.photobucket.com/albums/a1...x/DSCN6282.jpg |
Love it! I've always hated not being able to see down there lol, one day I'll do something like this :P |
^ Your not the only one. OP, they look damn good. |
Damn!! I really like that. |
Looks good. Forgive my ignorance, but what are BCM? |
Originally Posted by rcoers
(Post 14576057)
Looks good. Forgive my ignorance, but what are BCM? |
looks great! I just picked up some red led's to do the same thing but now I'm thinking I should have done white.. |
Looks good.... |
That came out nice. |
I did red and then blue in my 07 TBSS back in the day. GARRRRRBBBBAAAAAGGGGEEE. Go white or go home |
did u install those yourself? or did u just replace the factory bulbs? |
That looks awesome! I would love to see how you did it. |
Looks great man might have to do this soon. |
Thanks everyone! :D
Originally Posted by MeentSS02
(Post 14576399)
That came out nice. This is how MeentSS did his, which gave me the idea.. http://i305.photobucket.com/albums/n...s/IMG_0761.jpg http://i305.photobucket.com/albums/n...s/IMG_0756.jpg
Originally Posted by WhiteBird00 Yes, your red (power) wire will go to the dark blue with white wire at the BCM and your black (ground) will go to the white wire at the BCM. The dark blue with white wire is in the black 6-pin connector. The white wire is in the green 32-pin connector. The BCM is mounted to the duct behind the glovebox so that is likely the connectors you saw. I was having trouble getting enough room to pull the BCM harnesses down to splice into them, so instead I took off my rear view, pulled down the headliner and spliced into those same wires. The blue with white power wire controls them to shut off after the door is open for too long. The white (ground) controls the dimming effect. Instead, I used the white as the ground for the LED's, and used the BAT (battery) fuse as the power from the fuse box. |
Originally Posted by s25hanh
(Post 14576737)
did u install those yourself? or did u just replace the factory bulbs? |
Looks like a clean install. I tapped into the dome light power source for my UV LEDs: http://carphotos.cardomain.com/ride_...0324_large.jpg http://carphotos.cardomain.com/ride_...0325_large.jpg |
OP, looks good.. heres some pics of mine. Sorry for the poor quality, my camera was not cooperating with me. FWIW, I wanted them on when the headlights are on so I tapped into the ash tray light.. Ran two lights in parallel. I also just installed a small red led behind my rearview mirror that shines down dimly onto my shift knob/ cup holder area. looks sweet at night, but doesnt really show up in pictures. (I dont know why the red lighting showed up so bright in the second pic, its more subtle in person) http://i1193.photobucket.com/albums/...6/SAM_0245.jpg http://i1193.photobucket.com/albums/...6/SAM_0241.jpg |
Sweet. Now you gotta keep your floors vacuumed 24/7 lol |
looks good man. I ordered all my LEDs a week or so ago. Now just gotta pull the car out of storage |
Which led strips are you using for this? Looks awesome! |
| All times are GMT -5. The time now is 09:31 PM. |
© 2026 MH Sub I, LLC dba Internet Brands