Question about FRC and Strut Tower Brace
 

with the strut tower brace already installed, will the Fuel Rail Covers fit under it? i have a LG MotorSports Strut tower brace with three points: left, right and in the middle,,, so i really rather not take off the strut tower brace becuase of the center bolts. can the FRC be installed with the strut tower still installed?

thanks

Re: Question about FRC and Strut Tower Brace
 

Not likely!
They can be hard enough without the STB in place

Re: Question about FRC and Strut Tower Brace
 

ttt,

i have seen lots of cars with the strut tower installed... can you easyly remove the fuel rail covers off and on? and was it hard at first, trying to get it to fit under it??

Re: Question about FRC and Strut Tower Brace
 

I have the Hotchkis STB and I have to remove it to install and take out my FRCs. Just no way to do with the STB in without damaging the FRCs.

Re: Question about FRC and Strut Tower Brace
 

I have the Hotchkis STB and I don't have to remove it to install FRCs.....I even removed my coil packs and valve covers with the STB on <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />

Re: Question about FRC and Strut Tower Brace
 

my driver side frc rubs my BMR STB. And I take the STB off to take off the frc's, but it's only 4 bolts, so it's easy.

Re: Question about FRC and Strut Tower Brace
 

I hate taking off my Hotchkis STB. I put my FRC's on without removing it. I have to bend the shit out of them though. They are no worse for the wear which is surprising. I plan on getting some nice FRC's so I don't really care about the condition they are in.