CME owners, I need your help
 

So I have neglected the tips for some time and have a lot of black crap all over them. What products would you recomend to get them clean again? I have tried washing them with soap and water and a SOS pad, looks better, but still not clean. Thanks for any help.

I got tired of the CME getting the carbon engrained in the metal. In the end, I took the tips off and had them ceramic coated and the carbon would just wipe off after. Before I ceramic coated them I used a die grinder with a rubber eraser that managed to get the metal really shiny. Hope that helps!

I spray a little on my tips inside and out and all the carbon crap dissolves right away and they shine up.

http://images.oreillyauto.com/parts/...mgr/g14024.jpg

Might try never dull.

I sanded the lips with 1000 and 1500 grit sand paper then finished it with chrome polish, came out real good.

Forgot to mention I got a crappy photo in my album if you want to check it out, you can still tell they shine good and trust me, they were all black as well.

when I bought my car from the dealer, my CME tips were black. You couldnt even see them.

I took a wire wheel and hit them real quick. Then some sand paper...then aluminum polish. Came out looking like new.

now everytime I wash my car, I just whipe them off.

This stuff works magic on raw metal . Will clean the tips up wonderfully ! you can get this
stuff pretty much anywhere , Parts stores , Wal-Mart , etc .


http://www.amazon.com/Eagle-One-1035.../dp/B000CNBI1A

this stuff is amazing.

http://calcustom.businesscatalyst.co...tal_polish.jpg