Stance thread ***DON'T QUOTE PICS!!!***
 

Well lets face its the wheels and stance of a car that set it off more than anything else. So id like to see everyones stanced F-bodies and lets see specs while your at it. (shame free whoring!!!)

Eibach Pro-Kit with "DD" C5's 17x9.5 all the way around...

https://ls1tech.com/forums/picture.p...ictureid=54092

Front: 275-30-19 tires, 19 x 9.5 wheels, Eibach Sportlines and Bilsteins.
Rear: 345-30-19 tires, 19 x 13 wheels, QA1 coilovers.

Attachment 672801
Attachment 672802
Attachment 672803
Attachment 672804

Factory bilsteins with BMR A arms and a moser 12 bolt. Front sits lower than the back.Attachment 301787

cut coil in the front, hose mod in the rear

Intrax springs and Bilstein HDs going on next weekend

Attachment 672805

Very nice guys post up specs of your wheels as well like offsets etc.

Did you just come on LS1Tech and say 'stance is everything'?

Smh...

Well it may not be everything to everyone, but it certainly is important

QA1s(front) Competition Engineering /BMR 1in lowering springs(rear). 17x8.5s powdercoated Z06 Spyders.
Attachment 672806

Front raised 3/4in to accomodate for softer sidewall and more ground clearance switching to fats/skinnies. 15x3.5s(front) & 15x10s(rear) powdercoated Racestars.
http://i75.photobucket.com/albums/i3...y/DSC_0088.jpg

some of you guys got "stance".....some of you guys really dont understand the concept
if you can fit a 3piece and a biscuit between your fender and tire, you dont have stance

[IMG]http://i628.photobucket.com/albums/u...olishes033.jpg[/IMG]

lg lowering springs

Here is my WS6 with stock wheels koni 4/4 and H&R sportkit

[IMG]http://img713.imageshack.us/img713/3130/sickv.jpg Uploaded with ImageShack.us[/IMG]

Trans Am is lowered with Strano Springs (Still using isolators AND heater hose in the rear......................)

Camaro has heater hose mod in rear and KB Hypercoils in the front

Attachment 672807

I was thinking the same thing. It smells a lot like "Offset is everything" from the same crowd that brought you hellaflush or VIP style with it's goofy negative camber and stretched rubber.

^ My thoughts also. A lot of us don't go for "Hellaflush" stuff. Maybe a rack stance for drag cars and just enough to kill a lot of the 4x4 stance of these cars but nothing more than that.

:lol:

WTF is a 3 piece and a biscut?

Looks amazing man.

Attachment 672808

Attachment 672809

^^^ me no likey