How to Remove TA Round Air Vent's??
 

Got 2 5/8 boost and fuel pressure gauges to put in the TA, but i can't get the vents out...and i don't want to break anything. What's the easiest way to do this?

https://ls1tech.com/forums/appearanc...-98-02-ta.html

https://ls1tech.com/forums/appearanc...t-removal.html

they should just "pop" out. IIRC it took a little effort the first time but after that they came out pretty easily...just grab ahold of the vent, wiggle it a little and pull at the same time...

So i not only take out the vent/air thing, but i also take out the bezel surrounding that?

yeah, the bezel will come out as well, and the 2 5/8 gauges will fit perfectly

I have a TA also, Is the Vent on the Left end of the Dash the same as the 3 middle ones?

yeah, all the round vents are the same...

use the smallest flatest screwdriver to help you carefully pry it out of the socket.


that's what i did.

good luck, they break easy.

Vent's? The vent's what?

/grammar nazi

:P

no actually they are not all the same. The 3 center vents are the same, but the other 2 are different.

^ Damn beat me to it

Do they all remove the same way?