Camaro's with 4' inch Tips. Ok. so ive been running a dumped exhaust before axle, wanting to go back to tips out back. Anyone running 4' inch tips? Pics welcome. :D |
I personally liked my Borla 4" tips that I had. Not a fan of duals on Camaros, so single 4" were nice to me. http://img577.imageshack.us/img577/2530/dscn0232o.jpg http://img198.imageshack.us/img198/9092/dscn0233l.jpg |
|
Yes I looked there, nothing but TAs though. Im requesting pics of Camaros with 4inch tips. If not, ill just stick to my dumped exhaust. |
|
|
Are those real corsa tips? ^^^^ |
Originally Posted by Ovechkin~Monk
(Post 15665020)
http://desmond.imageshack.us/Himg43/...jpg&res=medium http://desmond.imageshack.us/Himg13/...jpg&res=medium |
My problem with tips on Camaros is from the side you an see the pipe leading up to the tip which ruins it for me. CME or any kind of rear valence that hides the exhaust is soo much better imo. |
I would do with the 4" tips. I have the ones from AfterThoughtAuto and they look good but there not big enough when you look at them from the back when you put the size of the rear tires into play. 4" tips look the best and I will agree with sixvi6-camaro, you do see the piping from the side which is kinda a turn-off but personally, I want mine to run out the back any way so I had to give up something for that. |
i agree on a camaro cme, or no tips look the best, i have been thinking of running my duals into a cme, but i really like not having any tips |
No there corsa clones, and my rear skirt hides the pipes pretty good. |
Originally Posted by fbodyrs96
(Post 15673269)
No there corsa clones, and my rear skirt hides the pipes pretty good. |
Originally Posted by dabest09
(Post 15673621)
Those look great. Where did you get them? They cannot be found anywhere nowadays. |
I chose the 4" single tips option when I bought my SLP LM2 catback. I haven't installed it yet but the tips looks real nice, they are double walled soo they are good quality. |
the corsa tips look the best IMO for these cars. |
Ya I 3.5 is the sweet spot but just imo |
Originally Posted by dabest09
(Post 15673621)
Those look great. Where did you get them? They cannot be found anywhere nowadays. |
Originally Posted by fbodyrs96
(Post 15675725)
ebay, few years ago $40 bucks shipped, same seller now is like $80-90 + shipping. |
http://www.ebay.com/itm/Dual-Angled-...item19cb6ca518 They could be those, but only problem for me is they are 2.5 inlet and I need a 3" inlet. |
| All times are GMT -5. The time now is 04:15 PM. |
© 2026 MH Sub I, LLC dba Internet Brands