FRC's
 

Question, Is Ebay the only place to pic up FRC's or is there a online shop that sells them?

www.Not-A-Sponsor.com.org.net.gov

12559261 - '97-'98 LH
12556455 - '97-'98 RH
12561503 - '99-'02 LH
12561502 - '99-'02 RH
12564257 - '01-'02 LH -Z06
12564258 - '01-'02 RH -Z06

If I remember right the 97-98 ones fit better on fbodys


Please do not post non-sponsor links.

Thanks,
Craig.
LS1TECH.com Staff

Frc
 

afterthoughtsauto.com

It would be ALOT cheaper to modify them yourself. Or check Ebay to see if you can find some there.

Damn, Sold again already, ...

'deleted link'

So is each Corvette FRC only $24 on the GM parts page? Because on Afterthoughtsauto.com, they're like $200. Is there something I missed?

Ya the hard work and time that goes into a beautiful set like mine :usa:

I you go woth the Vette ones, there is alot of work that needs to go into it. Like cutting, sanding, painting. etc...... If you like that idea, then do that and save some money. And plus it becomes more of a personal work of art for ya.

Here is how to cut them:
This uses Z06 fuel rail covers, which only have one fuel line slit
http://www.sysadminzone.com/ta/z06cvrs/

This uses 1998 Corvette Fuel Rail Covers, which have 2 slits:
http://community.webshots.com/album/77970122aHMOYr
PN :12556455 + 12559261
(Two PNs, one for the left, and one for the right)

--VIP1

Neither link works!

Please do not post up non-sponsor links, contact info, etc...

We have a few sponsors that offer them, look them up --->

...and Scoggin-Dickey Parts Center (SDPC) sells GM parts.

Peace,
Craig.

This thread is over 2 years old.
Also, those were "how-to" links, not non-sponsor products.

Found this thread with a search... I am interested in a "template" to go from but none of the links work :(

There are no 'templates'.
Just look at photos & start cutting if you're doing it yourself.