Custom Gauge Panel Need Your Opinion
#1
Teching In
Thread Starter
Join Date: May 2012
Location: Pampa, Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Custom Gauge Panel Need Your Opinion
So i'm building a guage panel for the speedhut gauges i'm putting into my 1968 Bel Air Wagon.
Here's my two options so far.... what are your thoughts.... back panel will be brushed aluminum and front obviously carbon fiber.. everything below the bottom straigh line will be behind the dash bezel.
Here's my two options so far.... what are your thoughts.... back panel will be brushed aluminum and front obviously carbon fiber.. everything below the bottom straigh line will be behind the dash bezel.
#3
Teching In
Thread Starter
Join Date: May 2012
Location: Pampa, Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
i'm going to make the front carbon fiber pieces out of plastic.. i've got a Rapid Prototype machine and then i'm going to have them Hydrographic'd... i'll probally water jet the alum back plate.