When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Lol.... there is a youtube video showing how to turn it and pull it out
Saw the video. I tried man. haha but with no luck. it worked out though. I have the bumper off and I'm doing a few other things while it is off. I replaced the headlights with Wagners HID headlights and I am going to do the wire tuck too. Things were looking good for a minute but I am running into some issues. For some reason, the passenger side headlights are not working right now but I will work it out.
These are the halo ones InfiniteReality posted about, I just got done installing them a couple of days ago, using the "Cup" method (stock housings dremeled to allow insertion of the new lights).
These are the halo ones InfiniteReality posted about, I just got done installing them a couple of days ago, using the "Cup" method (stock housings dremeled to allow insertion of the new lights).
I'd been debating on doing this for about a year and just decided to pull the trigger. Opted not to go with halos. Now that I see your set up, I'm wish I had.
I really want to find a set of 3-4" diameter lights that are really shallow, like no more than 1.5-2" deep. I have a FMIC, so I had to trim back the bumper, so I don't have a lot of room to put lights.
I just got mine off ebay yesterday, hope they last, there may have been epoxy involved! I don't exactly share the tool source ya'll do! Ha, but I'm dang proud of myself! Thanks for all the help I find here! Danni
I really want to find a set of 3-4" diameter lights that are really shallow, like no more than 1.5-2" deep. I have a FMIC, so I had to trim back the bumper, so I don't have a lot of room to put lights.
For now, I have twin intercooler kit - but when I go FMIC.... I'll be looking to do the same... trying to score super shallow lights some how. I imagine that at most, they would need to have a depth of 1" to 1.5"
For now, I have twin intercooler kit - but when I go FMIC.... I'll be looking to do the same... trying to score super shallow lights some how. I imagine that at most, they would need to have a depth of 1" to 1.5"
I got a set of these to do the same thing, they are thin enough that they can still sit back in the bumper cover, not quite as far as the stock one but not far enough out that it would look like a tacked on light and be in position that hardly anyone would notice really. Hoping this winter to tackle the project again and make it work.
I got a set of these to do the same thing, they are thin enough that they can still sit back in the bumper cover, not quite as far as the stock one but not far enough out that it would look like a tacked on light and be in position that hardly anyone would notice really. Hoping this winter to tackle the project again and make it work.
Set mentioned in this thread, difficulty comes from having to build a mount setup that will work around the IC since brackets that would typically be mounted to no longer exist.
03-08-2018, 12:35 PM
