ZamVal.Z28

Well i read a lot of times this but no one ever seem to try it....
I bougth this 2011 wrecked ss camaro seats ...
They are the update to my old and unconfortable seats...
Seems they are going to fit well...
I'm cutting the rails and welding the old one so the New seats go in the same place , i'm also going to make or try to make all seat functions work on my 4th gen.
Sorry about my english ..i'm a little rusty .
Greetings From michoacan México..
First pics.

The Alchemist

iTrader: (19)

Cool project... I'd love to see pics as you progress.

LT4vert

iTrader: (3)

Good luck with the rails. Hopefully you can get them sitting lower. Honestly with the exception of the height, they dont look near a hulkish as I would have imagined in a 4th gen.

CamaroSS27

iTrader: (6)

They look awfully big, do they sit much higher? Good luck, in for progress update.

ZamVal.Z28

Yes now they are way higher ...
But i'm cutting the rails and welding the 4th gen oneS they are a lot smaller... hopefully they fit better

ZamVal.Z28

After some welding, bending and a lot of thinking there is some progress ...

They are higher and i'm very tal so i need them sitting far back but a little progress it's nice...

ZamVal.Z28

Admin.... why do I need my reply to be authorized

The Alchemist

iTrader: (19)

It's an automatic feature with the software. Since you have a very low post count, and attached a lot of pictures, the software interprets it as possible spam. I approved your post.

The seats look great. I bet they are a nice upgrade over the factory seats. Job well done.

ZamVal.Z28

Thanks .... I didn't remember that I had years reading but never posting...

Neko

Is that a navy blue Camaro? If so, id love to see some photos from outside to see how the red compliments it. I've been thinking about swapping seats but just keep going back to Corbeau CR1s.

ZeeSNuttS

nice seats but to BIG for the 4th gens IMO

ZamVal.Z28

Yeahhh. Nbm camaro ...ah I got tinted Windows and windshield almost never put my Windows down ....
All the car has red accents

ZamVal.Z28

They perfect form average size People ...
I'm too tall. I'm gettin them a little farder back.

OnyxZ28

looks good it will fit you just need some angle iron for the rear and a strip for the front brackets. I already seen the setup on Camaro5 forum. Im looking to upgrade also, the aftermarket seat cocer replacements are way to expensive this is a better alternative l.