AC Vent - Gauge Mount (Camaro Small Vent)
03-07-2017, 03:46 PM
#1
11 Second Club
Thread Starter
iTrader: (2)
Join Date: May 2016
Location: Rochester, NY
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
AC Vent - Gauge Mount (Camaro Small Vent) Did some searching around looking for a filler panel that I can mount my wideband to. I would like to use the vent on the drivers left (near the window). I know 6LE makes the filler panel for the central vents, but those are bigger than the one on the left. Anyone out there have one made, or know where to get one? Hopefully the pics can help explain this a little better....
03-08-2017, 04:21 PM
#2
I made mine out of abs. It's pretty easy.
i took out the vent. Removed the fins leaving just the outer frame that pops into the dash. Then I traced it on a piece of abs, cut it and epoxied it to the frame. Then just pop it in like the vent normally would.
i took out the vent. Removed the fins leaving just the outer frame that pops into the dash. Then I traced it on a piece of abs, cut it and epoxied it to the frame. Then just pop it in like the vent normally would.