Painting Intake??
05-23-2005, 10:55 AM
#2
Teching In
Join Date: Apr 2004
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
I removed the little circle indents on each intake rib on top. Eventually sanded it down to 400 grit. Applied primer. Let it dry. Sanded down with 600 wet. Wiped down with prep-all. Put multiple light coats of regular duplicolor paint. Let dry. Apply a couple coats of clear. Let dry. Wetsand with 1500. Wiped down. Put another couple coats of clear. Let dry. Put your favorite paint care products on.
05-23-2005, 01:22 PM
#4
TECH Enthusiast
iTrader: (3)
Join Date: Mar 2004
Location: Berkley, MI
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
Where do you guys all get your paint and sanding supplies? I've never seen 1500 grit paper anywhere. Then again, I'm probably not looking in the right places either.
