Wire mod=Car won't start?
 

I just finished up the wire mod on my car about a day ago. Before I taped up the wires I checked to make sure that the car started,it did so I wrapped everything up nice.Now I ent to start the car and it won't turn over. Any help would be appreciated,I need to pick my hood up tomorrow,and I wanted to go to the track this Saturday.:cry:

Duplicate post. https://ls1tech.com/forums/appearance-detailing/340390-wire-mod-car-won-t-start.html
Can't help much with your question though, as I've never done this mod.

Your only alternative is to unwrap everything and recheck that all the plugs are tight and there are no breaks in any wires. Sucks, but that is all you can do.

Yeah odds are we cant help you... something is loose or undone. "if at first you dont succeed, try and try again:)"

I was under the impression that all the wires were for the front headlights and fog lights,i didn't know it had anything to do with the starter or the battery. Is it possible that I may have blown the fuse for the fuel pump,starter,ignition,etc.?

That was the impression Steve and I were under when we first did this mod. But we never did trace any of the wires to see where they went. Just figured if we were carefull we would be OK.

Check all of the fuses if its not one of them, time to unwrap the wires and see what happened.

See my reply to monster's other post on this...there's definitely something important in there... :)

Sorry to hear about your troubles. Hope you get it fixed.

sure are a lot of wires there to just be for the headlights and fog lights. I would go back and check everything