shaker hood?
 

I am considering trying this. Getting a shaker scoop of a '79 T/A, cutting a hole in the hood, and making a mount to attach it to the top of the intake/TB. If it doesn't work out, I'll just attach the scoop to the underside of the hood instead of the intake.

BTW- I have an '98up T/A conversion on my car.

Has anyone done this? I think it would look badass.

You mean something like this?
http://www.2002firehawk-c26.net/Heri...ritageTA11.JPG

Look for more info on the Heritage Trans Am. Thats your best bet

I have these pics... make up your own mind.
http://i32.photobucket.com/albums/d1...3/893befc7.jpg
http://i32.photobucket.com/albums/d1...3/3f053c7d.jpg

ram air trans ams are the nicest out there. but damn that's over done

holy disgusting

found this a couple posts down, and this ta looks good


http://www.2002firehawk-c26.net/HeritageFBody.html

I really like that TA!

nice body kit!!

That's the same car from the engine pic that Ling_650vette posted.

I did it!
http://i71.photobucket.com/albums/i1...x/P1070866.jpg

I am not a fan of the scoop on the Ram Air hood. Also, the fender heat extractors along with the stock vents are too much for me...one or the other, but not both.

wow.. .I've been lookin into this. only on a non WS6 hood though. Still trying to figure out the mounting.

I settled on attaching the scoop onto a strut tower brace. It doesn't shake like I wanted, but it looks cool.
The hood is too sloped to allow room for a scoop to shake. There is too little clearance between the airbox and the hood.
Let me know how your install goes if you do it.
Russ

Wow.. that red T/A is hideous..

whats with the stick on fender vents?