what to do while motor is out?
#1
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
what to do while motor is out?
well my motor is out of the car and i used simple green to clean it up nicely. i cleaned the wheel wells and painted them black along with a couple other things so it doesnt look dull gray. i plan on doing the wire mod but i want to do something else to spiff it up too but im not sure really what to do to give it some shine, waxing didnt do anything because there is no clear coat.
any ideas what i should do to make it nicer
any ideas what i should do to make it nicer
#3
TECH Apprentice
iTrader: (11)
Join Date: Nov 2001
Location: Granada Hills, CA
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Along with doing the wire mod, you might want to look into hiding as many of the ground wires as possible. That usually leads to a clean look.
Also if I ever were to have my motor out, I plan on putting some of that fireproof sound deadening along the firewall and the tranny tunnel. Not sure if thats something you would want to look into. Other than the basic cleaning and stuff, nothing really comes quickly to mind...
Also if I ever were to have my motor out, I plan on putting some of that fireproof sound deadening along the firewall and the tranny tunnel. Not sure if thats something you would want to look into. Other than the basic cleaning and stuff, nothing really comes quickly to mind...
#4
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 00CaliforniaZ28
I would probably route wires to make them as hidden as possible when the motor is back in. Now would be a great time to do that, especially the !wire mod, that should be cakewalk with the motor out.
Also if I ever were to have my motor out, I plan on putting some of that fireproof sound deadening along the firewall and the tranny tunnel. Not sure if thats something you would want to look into. Other than the basic cleaning and stuff, nothing really comes quickly to mind...
Also if I ever were to have my motor out, I plan on putting some of that fireproof sound deadening along the firewall and the tranny tunnel. Not sure if thats something you would want to look into. Other than the basic cleaning and stuff, nothing really comes quickly to mind...
car is not a daily driver anymore, its going to be a track car/weekend warrior, so im not going to do the sound deadening, trying to get rid of all the unessacary weight i can.
i found that import quote on a mustang forum, lol. i thought it was hilarious, i had to put it in my sig
#7
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jbuerke142
CLEARCOAT!!!
hell, my dads friend works at a body shop and he could do it in his garage, so maybe i should see it he could do it for me, but i need to take everything out of the engine bay
Trending Topics
#8
TECH Apprentice
iTrader: (11)
Join Date: Nov 2001
Location: Granada Hills, CA
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JDP
wire mod is the only way i know to hide some wires, im not sure what i could do with the cluster **** of **** on the driver side.
car is not a daily driver anymore, its going to be a track car/weekend warrior, so im not going to do the sound deadening, trying to get rid of all the unessacary weight i can.
car is not a daily driver anymore, its going to be a track car/weekend warrior, so im not going to do the sound deadening, trying to get rid of all the unessacary weight i can.
#10
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 00CaliforniaZ28
Well there are a lot of wires that are ground to bolts that are highly visible. You can move these grounds to bolts that will be out of view when the engine is back in. Example would be the ground thats going to your passenger shock tower, or the ground wire on the front of the engine bay. Just throwing some ideas out there for ya! I know what you most be going through.... its like, "****, I have this huge obstruction out of the way, and look at all that room to work, but ****, what do I work on!"
**** it, ill do what i can, keep the ideas coming peoples
thanks
#13
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
^^^ good god that looks ****, want to take the time and come do mine? how much would that run me to have somebody do it? maybe i could get my friends dad to take the time to do that to my car, im sure he will want a good amount of money for something like that
#15
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Feb 2006
Location: Allen Park, MI
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
i want to still keep the heat for those chilly nights in the fall when im out for late night "car shows" but i plan on getting rid of the abs eventually and ill see what else i could do to hide the wires
#16
i used a spray can to paint the engine bay. got the idea from blown383 member. it looks really good,clear was added to the paint. i can email pics and name of the company i got it from.