TH400, what shifter? I'm going to be installing a short tail Rossler TH400 in my Camaro, do you guys have any shifter recommendations for a rmvb th400 with a 6 speed console. Thanks in advance. |
Hurst quarter stick. |
I went with the hurst 1/4 stick with the trans brake button built in.I also have the 6spd console . |
I really wanted to go with a ratchet type shifter, do you guys have a link to the ones you have or a part number by any chance? Thanks again. |
I'm going to try to fit a Cheetah unit in my 6-speed console. |
I put a b&m pro ratchet shifter in mine and I love it. very lil mod was necessary to intall it and I actually kept my orig auto upper console. |
|
I dont care for it too much, but you wont find any that fit like that. |
Thanks for the replies. |
I bet mine fits better than anybodies and I did not have to cut a single bit of the console to do it. I used the stock shifter. Take the stock shifter out and you can modify the stock gate so that it locks into 2nd gear when you pull it back then you press teh button to make it go into 3rd. I also welded in a stop to the rear of the shifter so that it won't try to go any farther back than 3rd gear. I did this last spring and drove the car all summer and fall with it that way and loved it, and best part is it looks 100% stock, and yes this was my TH400 with RMVB setup. |
I say the B&M ratchet shifter it works great because it dosen't move around alot. I had the hurst quarter shifter and it wa tight for space with the six speed console. you will be more than happy with the pro ratchet shifter trust me. |
B&M Quick Silver FTMFW. I'm installing one now. |
B&M pro ratchet in my Trans am |
Hurst Quarter Stick here. |
Originally Posted by krissoto
(Post 12934200)
I put a b&m pro ratchet shifter in mine and I love it. very lil mod was necessary to intall it and I actually kept my orig auto upper console. |
Here's mine mocked up, I gotta add the elec. solenoid stuff. http://i391.photobucket.com/albums/o...7/100_0607.jpg |
Originally Posted by Z28/2002
(Post 12938730)
I'm running the same shifter but mine fit in the stock 6 spd console |
will be putting in a pro-ratchet myself with an auto console. |
I've got the quicksilver... Love it |
All times are GMT -5. The time now is 05:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands