Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Lost "Help"

Thread Tools
 
Search this Thread
 
Old 02-22-2011, 01:42 PM
  #1  
FBR
Teching In
Thread Starter
 
FBR's Avatar
 
Join Date: Feb 2011
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default Lost "Help"

Ok so here's what happened . Stop and got gas when I got back in the truck the RPM and speedometer didn't work and the truck didn't shift into first had to put it into 1 myself and I think it is only going into 2 then move it up to 3 . the check engine ligth came on and is pulling 12 codes ranging from trans soliniod to o2, it's a gm truck with 4l60 5.7
also the indicator light goes off when in 2 and 1

Last edited by FBR; 02-22-2011 at 03:26 PM.
Old 02-23-2011, 12:34 PM
  #2  
Teching In
 
yfzduner's Avatar
 
Join Date: Oct 2010
Posts: 43
Likes: 0
Received 1 Like on 1 Post
Default

I had a similar problem with my 02 6.0L hd truck. It ended up being a fuse with a bad connection.
Old 02-23-2011, 01:04 PM
  #3  
TECH Regular
 
ArkBird96's Avatar
 
Join Date: Mar 2009
Location: Ricerville
Posts: 420
Likes: 0
Received 0 Likes on 0 Posts
Default

You have set "limp mode". The computer parks the trans in 3rd but you still have manual 2nd when the shifter is in D2 or D1. Somehow, you have lost power to the trans. Does your speedo still work? My guess is a bad connection at the trans connector or a bad fuse.




All times are GMT -5. The time now is 05:06 PM.