Gears Won't Go In
Looked again at your vid, man I was really confused by the orientation. Clearly I'm thinking the wrong side. Not sure about that one, looks a little different than my abs. Look in the recess above where the k member bolts to the rear leg of the control arm. That is where the plug I thought that was plugs in on the drivers side. Otherwise sorry for pointing you in the wrong direction.
Thread Starter
Teching In
Joined: Dec 2011
Posts: 42
Likes: 0
Looked again at your vid, man I was really confused by the orientation. Clearly I'm thinking the wrong side. Not sure about that one, looks a little different than my abs. Look in the recess above where the k member bolts to the rear leg of the control arm. That is where the plug I thought that was plugs in on the drivers side. Otherwise sorry for pointing you in the wrong direction.
Thread Starter
Teching In
Joined: Dec 2011
Posts: 42
Likes: 0
Look HERE PLEASE Hey guys can u help me out and find out what part this is that got chipped and fucked up.. It's on video #2 (don't pay attention to the ring I removed that on purpose)
http://youtu.be/juD31vAyIvU
http://youtu.be/5RUkISklN-I
http://youtu.be/juD31vAyIvU
http://youtu.be/5RUkISklN-I
Thread Starter
Teching In
Joined: Dec 2011
Posts: 42
Likes: 0
Moderator
Joined: Aug 2010
Posts: 7,323
Likes: 529
From: Ann Arbor, MI
Is this the part
http://www.ebay.com/itm/130580779227?redirect=mobile
http://www.ebay.com/itm/130580779227?redirect=mobile
The other questions is whether the pump housing got damaged; you should post good pictures and get advice from the pro builder here.
