ScorpioV8

Reason I ask, I have a 60 degree V6 4L60E from a camaro that I bought to fit my Northstar V8 project.....and a 2005 Silverado 1500 4x4 box that came with my L33 5.3 LS, but I will need to change the tailshaft to 2WD. I have the tailshaft and tailcone, but if they are the same internals, I can swap the bellhousing as they are both removable, then do the tailshaft conversion later down the line.


Both boxes have the 6 bolt tailcone, not sure of the exact age of the camaro box but AFAIK it was 2003 from the sticker on the bellhousing. Both came from low miles salvage vehicles.

So did they use lighter duty parts in the camaro box?

Thanks