Converter fit issue - what is proper height for an LT1?
#1
Converter fit issue - what is proper height for an LT1?
I am having trouble with an install on my 96 corvette. LT1/4l60e.uu
I only hve 1 inch, maybe 31/32" between bellhousing and converter tabs.
Converter measures 6 inches from hub to mounting lugs.
The old converter is 5 13/16" tall and I get close to 1 1/8" from bellhousing and gives me needed clearance to the flexplate.
With the new converter the mounting lugs deflect the flexplate and is too tight.
Is the new converter too tall?
I only hve 1 inch, maybe 31/32" between bellhousing and converter tabs.
Converter measures 6 inches from hub to mounting lugs.
The old converter is 5 13/16" tall and I get close to 1 1/8" from bellhousing and gives me needed clearance to the flexplate.
With the new converter the mounting lugs deflect the flexplate and is too tight.
Is the new converter too tall?
#2
LS1Tech Sponsor
iTrader: (3)
5.900 from the end of hub to the mounting pads is the correct overall height and can only be measured accurately with a height mic.
Greg
Greg
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet