BassProCamaro97

iTrader: (10)

Pulled my 4L60E today and I have the allen head convertor bolts. I'd rather not put them back in since they are not fun to work with. All the arp bolts I'm finding are either short or to long.

Anyone have a suggestion for hex head replacements?

Thanks,

~Jim~

07NBSChevy

iTrader: (1)

I use ARP 230-7304 Converter Bolts (M10x1.50) for my 5.3/4L70E with stock flexplate and conveter. Keep in mind these are for stock flexplates and are not designed to work with aftermarket thicker ones. The Stock ones, at least on mine, have a 1/8" long smooth tip to align the converter to the flexplate. The ARP has the same amount of threads minus the smooth tip. The 230-7304 are the correct ones for LS to 4L60E with stock flexplate.

Just slap on some ARP Lube and torque them to 45 ft-lbs.

BassProCamaro97

iTrader: (10)

Awesome thanks for the reply. I ordered up the new ones this morning.

Thanks,

~Jim~

07NBSChevy

iTrader: (1)

Anytime, glad to help out.